Electronic Ballast for High Pressure Sodium Lamps
Place of Origin: China. Specifications: NZ230: 70W, 100W, 150W, 250W, 400W. Input Voltage: 220-240V. Power Factor: 0.99. ATHD: 10%.

Starter (QS5 Cam Series)
QS5 cam starters are mainly used to start and stop direct three-phase asynchronous electric motors with AC 50Hz current, voltage up to 500V, and capacity up to 7.5kW. These starters can also be used for changing over from one kind of circuit to another.

Electronic Ballast for T8
Specifications: 1) Rated voltage: AC230V / 50/60Hz ; 2) Voltage range: AC187V-253V ; 3) Lamp type: 1 x 18W / T8 ; 4) Power factor: 0.98 ; 5) T.H.D.: <15% ; 6) Pre-heat starting ; 7) Rated life: 50,000 hours ; 8) Dimensions (L x W x H): 266 x 40 x 30mm. Outer packing: 20pcs/carton. Similar models: 1) CDZ130 for 1 x 30W / T8 ; 2) CDZ136 for 1 x 36W / T8 ; 3) CDZ158 for 1 x 58W / T8

Magnetic Ballast
1) 40W, 30W, 20W available ; 2) Supply frequency: 50/60Hz ; 3) Lifetime: over 50,000 hours

Pulse Ignitors
1) For HS lamps 35-400W ; 2) Main voltage: 220-240V ; 3) Main frequency: 50-60Hz ; 4) Ignition voltage: 3-4kV ; 5) Load capacity: 20-200pF

Magnetic Starter
1) MSB series electromagnetic starters are used in AC 50Hz / 60Hz circuits to start, stop and convert motors ; 2) Protecting equipment from overload and phase failure

Intelligence Motor Soft Starter
1)This Motor Soft Starter can reduce the starting current of Motor and the power-distribution capacity to Motor effectively , so it could save the cost.
2)Can reduce the starting stress of motor and other loading equipments, so that lengthen their service life. 3)The function of soft stopping can solve effectively the surging problem of inertia system when stopping . The conventional motor starting equipments can not realize it. 4)The perfect and reliable protection features , can give the effective protection to the operator's safety as well as the motor and matched equipments. 5)The application of intelligent and network technique make this Soft Starter meet the high -speed development of Electrical force automated technique effectively..

Electronic Ballasts
1) High quality ; 2) Power factor: >0.98 ; 3) With abnormal protected ; 4) Pass GMC ; 5) THD ( total harmonics): <10%

Emergency Ballast
YH-40R can supply power to emergency equipments such as emergency lights and exit signs, When there is a power supply failure, YH-40R must be used together with a normal fluorescent lamp. After YH-40R installed, the fluorescent lamp can be operated as a normal lamp. When normal power supply fails, YH-40R would supply power to the fluorescent lamp immediately no matter the switch is on or off. houseing: Carbon steel. Light source: Fluorescent lamp(=<40W). Power supply: AC220V ± 10% 50HZ ± 10%. Emergency time: >=90minutes. Operating environment: -10℃ to +50℃. Batteries: Maintenance-free, sealed Ni-Cad chargeable battery group. Solid-state charger: The features of battery charging are timing, temperature compensation and constant current. Self testing: In the situations of blowout or bad connection, battery open circuit or short circuit, the yellow indicator shines. Over discharge protection: When the voltage of the batteries decreases to 80% of rated voltage, electric switch shall cut the discharging circuit automatically to protect the batteries.

HID Electronic Ballast
1) Input: AC220 - 240V 50-60Hz ; 2) Rated load: 35W/70W ; 3) Power factor: >0.98 ; 4) The products have interior triggering function and mainly used for the high intensity discharge lamps (HID) (mainly indicates metal halide lamps and high-pressure sodium lamps) having corresponding powers ; 5) High efficiency, safety, constant power output etc. ; 6) Widely used in the places e.g. square, roads, quays, stations and factories

Inductive Ballast
1) Voltage: 110-270V ; 2) Supply frequency: 50/60Hz ; 3) Lifetime: over 6000 hours ; 4) CMOS chip is made of high quality silicon steel sheets ; 5) We have inductive ballast for sodium lamps, inductive ballast for metal halide lamps, T5 fluorescent lamps, T6, T8 and T9 fluorescent circular lamps ; 6) The maximum work temperature can reach 120℃ ; 7) All plastic components are made of high temperature resistant and anti-flaming materials ; 8) Adopts advanced dip coating craftworks of vacuum, low noise, stable working capability ; 9) Appearance sprays coating with ceramic whiteware lacquer, excellent capability of insulativity ; 10) Specification: 1 x 20W, 1 x 30W, 1 x 40W, 2 x 20W, 2 x 30W, 2 x 40W ; 11) COMS chip is made of high quality silicon steel sheets, average working life is about 10 years.

Electronic Ballast with UL Approval
Our products are ul and fcc approved. Now the main models are available in wk-t8-232/is/120sc, wk-t8-232/is/277sc, wk-t8-432/is/120sc, wk-t8-432/ is/ 277sc, etc. Each of them can load the following two or two tubes: F17t8, fb24t8, f25t8, f25t12, fb31t8, f32t8, f40t8. The main performance data of our electronic ballast: Input voltage:120v/277v ; Pf: Above than 0.99 ; Thd: Lower than 10%. Life span: Above than 5 years.

Digital Electronic Ballasts
1) Energy-saving lighting product ; 2) Self-developed electronic ballasts are our patented products. They are suitable for MH, HPS and fluorescent lamps ; 3) Leads to the smart use and energy-saving of HID lamps, which are extensively used in the stadiums, green houses, production plants, roads and streets, airports, swimming pools, exhibition halls, parks and billboards ; 4) Enjoy many advantages due to configuration of the intelligent controllers in the circuit ; 5) Good assortment, and feature high power factor, low THD, low crest factor, energy saving, no flicker and stable performance ; 6) Highly appreciated by customers around the world

High-Efficient Electromagnetic Ballast
11) Noble design without buzz or hum ; 2) 10-year warranty ; 3) Rapid start-up and low heat ; 4) Low harmonic distortion levels ; 5) Deliver correct current for efficient starting and make tube durable

HPS Electronic Ballast
Specifications: 1) Rated voltage: 380-400V AC ; 2) Frequency: 50/60Hz ; 3) Power factor: 0.99 ; 4) THD: <8% ; 5) Ta: -40^oC ~ +65^oC ; 6) Energy efficiency: 95% ; 7) IP: IP2X, IP54 or IP20. Features: 1) Long line driven: =<50m (The ballast is able to install far from the lamp up to 50m) ; 2) Full protection: protection for open loop, short loop and hot lamp restart

All Types Of Electronic Ballasts And Light Fittings
All type of electronic ballasts, electronic transformers and light fittings for domestic and commercial use.

Fluorescent Lamp Starter
1) High quality products in a complete range of specifications ; 2) Features of quick start at both high and low voltages, long service time, outstanding performances, safety and reliability ; 3) We also provide special services for customers. Technical indexes: 1) Power of lamp tube: 4-80W, 4-36W ; 2) Rated power: 220V, 1000V ; 3) Range of start voltage: 180-240V, 98-130V ; 4) Peak voltage: >800VP ; 5) None closed voltage: >130, >70 ; 6) Start time: <4 seconds ; 7) Life: <12000 times

Ballast for Circular Lamp and 2D Lamp
We can supply the electronic ballast: 21w and 38w eletronic ballast for 2D lamp ; 22w/32w/40w eletronic ballast for circular lamp

Intelligence Motor Soft Starter
1)Parameter: a)Rated Vlotage:220V-660V ; b)Rated Frequency:50Hz,60Hz ; c)Motor Power:5.5Kw-560Kw ; d)Matched motor: squirrel-case asynchronous motor. 2)Perfect design : pretty external shape and structure , perfect and unique functions, simple and reliable operation , every technological is made in the best design. 3)Reliable and high-grade quality . This product is designed according to the computer analog test , has the best electromagnetic compatibility. It is proved high quality by the high-temperature ageing test and jigging test which down before the products out of factory. 4)Complete and perfect protection functions , such as offset voltage protection, failure voltage protection , over voltage protection, Motor overheat or starting time over long protection , input or output failure phase and three-phase unbalanced protection, over current, over load and short current protection.

Glow Starter / Fluorescent Starter
Parts: Pinch wire bulb, drum type bulb ; Aluminium pin, brass pin ; PP cap, PC cap, ABS cap ; Round capacitor, flat capacitor

Ul Listed Ballast For Metal Halide Lamp
HNow we can supply ul listed electronic ballast for metal halide lamp. The spec is as under: 120v 35w/50w/70w/100w/150w ; 277v 175w/250w/320w

High Pressure Electrical Ballast
1) 70% energy saving than magnetic ballast. Needless of starter and complementary capacitance. 2) without noise pollution. 3) start the light quickly without the flare and frequent flash. 4) output clamp tm can prevent the damage of super voltage and super current. 5) power factor is more than 0.9, no negative effect on the circuit or other electrical equipment.