Terminal Connector
H.F.W. series terminal connectors are used in the circuits of AC. 50Hz or 60Hz, voltage up to 660V or DC, voltage up to 440V current from 3A to 80A, for connecting the round copper conductors.

Loadbreak Elbow Connector
The TEF ZT-15/200 loadbreak elbow connector is a fully-shielded and insulated plug-in termination, rated 200amp, 15kV, connected with underground cable ranging from 25 to 120mm² (conductor cross section). Its loadbreak probe with an ablative arc-follower tip provides dependable loadbreak switching characteristics. The TEF ZT-15/200 loadbreak elbows are molded using high quality peroxide-cured EPDM insulation. It is used to connect underground cable to transformers, switchgear and 200amp junctions equipped with loadbreak bushings. The test point is available for use with hot line voltage indicators.

Cold Shrinkable Power Cable Terminations
1) Materials used are all imported from advanced countries ; 2) Silicone rubber is of sound insulation and elasticity, and maintains appropriate radial pressure over the interface, safely insulating the power cable to avoid possible electrical breakdown caused by the breathing effect during operation ; 3) Aging resistant, water repellent, and heat / cold proof ; 4) Suitable for use in areas of high altitude, frigidity, dampness, smogs and heavy pollution ; 5) Widely accepted in oil fields, chemical works and mining districts

Battery Terminal Series
1) JQGE-BT-1001 4Gax2 in to 8Gax2 out ; 2) JQGE-BT-1012 4Gax1 in to 8Gax2 out ; 3) JQGE-BT-1016 8Gax2 out ; 4) JQGE-BT-1020 8Gax2 out ; 5) JQGE-BT-1035 0Gax1 + 4Gax1 to 8Gax2 out

Mini USB Adapter
1) MINI PIN adapted to USB male plug ; 2) Can be colored according to customers' requirements ; 3) Can be used for data transmission of various kinds of digital products ; 4) Suitable for master computers and various kinds of digital products ; 5) Convenient and flexible use

Barrier Terminal Blocks
1) Materials: a) Housing: PA66, UL94V-O ; b) Terminal: brass 1.0t tin plated ; c) Screws: M4 steel nickel plated. 2) Electrical parameters: a) Voltage rating: 300V AC ; b) Current rating: 25Amps/way (max.) ; c) Wire range: 12-22AWG. 3) Operating temperature: -40 ~ +105^oC. 4) Torque: 18kg-cm/M4. 5) Safety approval: 2P-24P

Category 6/5e LAN Connector
These high performance Cat.6 LAN connectors with shields are easy to
assemble and have high stability. Specifications: Electrical: 1) UL applications: 250V AC, 2A (max.) ; 2) Dielectric withstanding voltage: 500V AC ; 3) Insulation resistance: 35M Ohm (max.), after environmental testing. Mechanical: 1) Cable-to-plug tensile strength: 20lbs (89N) (min.) ; 2) Durability: 750 matching cycles. 3) Temperature range: -40 ~ 60^oC. Material and finish: 1) Housing: polycarbonate (PC) UL94-V-0 or UL94-V-2 ; 2) Contact blade: phosphor bronze ; 3) Gold plating: 3u" - 50u" over nickel

7/16 (M/F) - 7/8" DIN Connectors
1) Screw coupling mechanism ; 2) Connection dimension: M29 x 1.5 ; 3) Characteristic impedance: 50Ω ; 4) Can be applied to connections with RF coaxial cables and electric instruments ; 5) Interchangeable with products that meet IEC 169-4 specifications

Terminal Block
1) Terminal blocks H, U(W), V(F) type ; 2) Material: made from PA, PE or PP

Wiring Connectors And Non-preinsulation Terminals
professional manufacturer of wiring connectors, preinsulation solderless teminals, sc copper tubes, naked terminals, electrical fittings, nylon cable ties, nail clips, electrical and electronic wire clamping pliers and tools, wiring ducts, cable markers, heat shrinkable tubings, fuses, etc..

Separable Connectors
We provide a complete range of cable accessories: ANSI/IEEE 386 and DIN 47636 standard pre-molded separable connectors for cables and bushings for ring main units, pad-mounted transformers and power cable connection pillars for voltage ranging from 6 to 36kV, as well as a large range of cold-shrinkable terminations and splices from 6 to 36kV.

21pin Connector
We can supply good quality 21pin connectors. Packing: according to per customers' requirements

UHF RF Coaxial Connector
1) UHF radio frequency ; 2) 500MHz ; 3) Reliable ; 4) Products catalogues are available upon request

WP Push Terminal
1) Use condition: -40 ~ 55^oC ; 2) Rating burthen: AC 50V 3A ; 3) Contact resistance: =<0.03Ω ; 4) Insulated resistance: >=100MΩ DC500V ; 5) Resistance: AC500V (50Hz)/min ; 6) Life span: 5000 times

Circular Pre-Insulating Terminals
1) Terminal blocks: H, U (W), V (F) type ; 2) Material: PA, PE or PP

Board To Board Connectors
1) Insulator: NYLON 6T UL 94V-0 ; 2) Contact: phosphor bronze ; 3) Plating: gold flash ; 4) Rating current: 0.5A ; 5) Rating voltage: 50V ; 6) Contact resistance: <40mΩ ; 7) Insulation resistance: 1,00MΩ at 500V ; 8) Dielectric voltage: 500V at 1 minute ; 9) Operating temperature: -20 ~ 105^oC

Cable Connector
Place of Origin: China. A variety of cable connectors. Detailed information on request.

Insulated Connectors
1) Tensile strength: 650 lbs ; 2) Torque strength (ft lbs): 10 ; 3) Voltage withstand: 12kV ; 4) Screw: 8mm ; 5) Weight: 86g

Plastic Terminal Connector
These products are manufactured and tested according to international standards, specially designed for electrical appliances, lighting fixtures, small transformers, and for all kinds of all kinds of applications which require safety connections and have the possibility of withstanding high temperatures.

10 - 35kV Silicon Rubber Cable Terminals
With superior silicon rubber, we have developed cold shrinkable cable terminals for use with cables under 15kV. Our silicon rubber cable terminals are easy to install. Applicable cable sections: 25 - 240mm².

Pre-insulating Termianl
1) Material: siver-coated copper piece covred by UL; appoved Nylon or PE/PVC ; 2) How to use: put in the bare wire end into the cap and press wit clipper ; 3) Application: wire joining ; 4) 0.5 - 10mm2 ; 5) IMAX = 19 - 62A

10 Pair Connection Module
1) Parallel tap ; 2) Front measuring and testing connection modules have a 1-piece contact providing continuous link between permanent wiring and jumper wiring ; 3) Over-voltage monitoring ; 4) Colored label attached to body ; 5) Insulation resistance: >=5 x 104Mohm ; 6) Contact resistance: =<1mohm ; 7) Pull of force: >=25N ; 8) Use time: >=100 ; 9) Copper conductor: 0.4-0.7mm ; 10) Materials: plastic PBT or ABS (UL 94v-0) ; 11) Contact material: phosphor bronze ; 12) Plating: silver

Cold Shrinkable Power Cable Terminal
For connecting three or single core power cable to the outdoor medium voltage apparatus like Overhead Power Line, Pole top Transformer, and Switch etc. The cold shrinkable outdoor termination consists of: 1. Cold shrink outdoor termination tubes with built-in stress controlling cone. 2. Cold shrink tubes (for three core power cable only). 3. Cold shrink branch Pipe (for three core power cable only). 4. Galvanized waterproof copper connector. 5. Accessories for installation.

GSM Fixed Wireless Terminal
Group 3 fax support(optional) ; Dynamic echo cancelation ; Network management support ; Caller line identification ; Intelligent call routing ; GSM/pstn bidirectional ; Call divert ; Pbx trunk connection or extension connection ; Gprs(rs-232 and rj-11 standard serial port equipped); External interface ; LED indicator ; Power supply, signal status, fax in use, fxs in use, status ; Antenna ; External antenna: GSM 900/1800 gain>2dbi ; Back plane interface ; Power supply ; Fax interface: Rj11 connects to regular telephone set.

D-SUB Solder Connector, D-SUB PCB Right Angle Connector
1) Insulator: PBT glass filled: a) Nylon-66 (D-SUB crimp housing) ; b) Nylon-6T (D-SUB PCB SMT for notebook) ; c) UL 94V-0. 2) Contact: a) Brass (male) ; b) Brass or phosphor bronze (female). 3) Shell: steel. 4) Plating: a) Contact ; i) Gold flash (complete) ; ii) Selective gold over nickel plated (contact area), TIN/Lead over nickel plated (tail area) ; b) Shell: tin or zinc over copper plated. 5) Rating current: 3A. 6) Contact resistance: <15MΩ; <25MΩ (D-SUB DUQL port). 7) Insulation resistance: 3,000MΩ at 500V. 8) Dielectric voltage: a) 1,000V at 1 minute ; b) 500V at 1 minute (D-SUB PCB SMT for notebook) ; 9) Operating temperature: -55^oC ~ +105^oC