CJX2(NC1)
Series AC Contactor
NC1 series AC contactor is mainly used in a circuit of AC 50Hz or
60Hz, rated working voltage up to 660V and rated working current
up to 95A. It is used to remotely close or/and to switch off the
circuit. Connected with a thermal relay, it can form an
electromagnet starter to protect a circuit in which overload
running may occur. If assembled with building block type
auxiliary contact set, air time-delay element or mechanic
interlock, it can form time delay contact, reversible contactor
and star-delta (Y-) starter. Electric
Cable Tangency
1) Material: PP, steel nail ; 2) Usage: put the cable under the
clip and hammer the nail into the wall to secure the cable ; 3)
Application: securing of cables for general indoor wiring.
Distribution
Box
Suitable for indoor use, these distribution boxes have a maximum
rated current of 63A. With the shell of the branch box made of
glass reinforced plastic, the plastic-sprayed surface has a
stylish appearance. The module meets the IEC 60439 standard, and
adds clamping time to ensure reliable contact.
Multi-Functional
Socket
1) Shining beige plate ; 2) 1 gang 1 way switch + 3 pin round
socket + 2 pin multi-function socket
High
Voltage Line Surge Arrester
Metal oxide arrester without gaps is used to protect the
insulator chains on transmitting line from lightning stroke
caused by lightning over-voltage, reduce tripping rate, improve
the lightning resistance level of line, so as to strengthen the
power supply reliability,100kv,200kv metal oxide arrester with
series gaps and 100kv,200kv insulator chains are experimented on
about lightning volt-second features. Metal
Enclosure Distribution Boards Series
These distribution boards are a type of service facility for
mounting indoors and outdoors, used in distribution decoration
projects and so on. Features: 1) Maximum capacity: 63A 2)
Disposed arc-gate: lucent and opaque 3) Simplex line opening
upwards at 90o angle 4) Two and three rows of door:
open to left and right at 180o angle 5) Rated current
of distribution box: 4 phase 50A, 36 phase 50A 6) Material:
insulation and self-extinguishing refractory 7) Color: white
RAL9003 8) Standard: IEC439.3 (EN60-439.3) 9) Surface and secret
installation available These distribution boards are a type of
service facility for mounting indoors and outdoors, used in
distribution decoration projects and so on. Features: 1) Maximum
capacity: 63A 2) Disposed arc-gate: lucent and opaque 3) Simplex
line opening upwards at 90o angle 4) Two and three
rows of door: open to left and right at 180o angle 5)
Rated current of distribution box: 4 phase 50A, 36 phase 50A 6)
Material: insulation and self-extinguishing refractory 7) Color:
white RAL9003 8) Standard: IEC439.3 (EN60-439.3) 9) Surface and
secret installation available.
Power
Tools and Cable Cutter
We can supply hand crimping tools,copper tube terminal crimping
tool, hydraulic tools, tool kit, IDC crimping fixture and
attachment and cable cutter and stripper, cutting and trimming
tool, automatic wire strippers with ten specification available,
cable tie fasten tool, modular crimps strips and cuts tool,
coaxial cable stripper, strippers and telectommunication tool
series and so on tools items.
Terminal
Blocks
1) Features: a) Voltage: up to 660V in circuits of AC 50Hz or
60Hz ; b) DC voltage: up to 440V ; c) Current: 3A-80A. 2)
Specifications: 3A, 6A, 10A, 15A, 20A, 30A, 60A, 80A, 100A, 150A.
3) Materials: PE, PA, PP
Power
Filters
UF serial (9.8 10.5 16): ET20 to ET28 (laying type/stand type).
Toroidal serial: The size of the figure and lead pin can be made
according to customers requirements.
Power
Accessories
Code: E01: 1)Title: Insulation covering ; 2)Material:
ADC12(Japan) ; 3)Size: 180 mm (Excircle) * 50 mm (Rounding-off
method) ; 4)Weight: 383.8 g ; 5)Working process: Die casting
--> Metalworking --> Baking finish. Code: E02: 1)Title:
Insulation covering ; 2)Material: ADC12(Japan) ; 3)Size: 181 mm (Excircle)
* 25 mm (Rounding-off method) ; 4)Weight: 178 g ; 5)Working
process: Die casting --> Metalworking --> Baking finish.
Clamp
1) Main line: insulated Cu or Al ; 2) Tap line: insulated Cu or
Al ; 3) Watertight connector: can withstand 6kV flashover in
water ; 4) Insulated body is climatic and mechanically resistant
; 5) One or two watertight tapping modules insulation piercing
type ; 6) Branch can be on the left or right ; 7) Easy to install
and safe to use; no loose parts, screws corrosion proof ; 8)
Independent tightening on main, controlled by shear head.
Digital
Panel Meters
1) Display: 4.5 digital LED display (red or green) ; 2) Accuracy:
0.5%±3digit ; 3) Auxiliary power: AC 110V±10% 50/60Hz AC 220V±10%
50/60Hz ; 4) Input signal: 100, 220, 380V or according to the
requirement current: 0-5A or 0-1A ; 5) Measuring range: all
ranges ; 6) Consumption: =<3.2VA ; 7) Max signal consumption:
=<0.3VA ; 8) Operating environment temperature: 10-50°C,
humidity: =<85% ; 9) Storage environment temperature: -30~60°C,
humidity =<70% ; 10) Heat resistance: case of non-combustible
plastic material ; 11) Voltage testing: over 2,000V ; 12)
Fastening: by nuts, absolutely safe, side-by-side.
Metal
Film Resistors
1) Outside color: silver grey ; 2) Marking method: color wreath ;
3) Resistivity scope (Ω) J (5% of ±): 1, 100Ks of
Multimeter
1) 32 range ; 2) Auto power off ; 3) Display: 30 x 60mm LCD ; 4)
DC voltage: 200m/2/20/200V±0.5%,1,000V±0.8% ; 5) AC voltage:
2/20/200V±0.8%, 700V±1.2% ; 6) DC current: 2mA/20mA±0.8%,
200mA±1.5%,10A±2% ; 7) AC current: 2mA/20mA±1.0%, 200mA±1.8%,
10A±3% ; 8) Resistance: 200/2K/20K/200K/2MΩ ±0.8%, 20MΩ
±1.0%, 200MΩ ±5.0% ; 9) Temperature: -20~1,000°C ; 10)
Frequency: 20kHz±1.5% ; 11) Capacitance: 2n/20n/200n/2μ/20μF±4.0%
; 12) Continuity checking with buzzer ; 13) Diode test: test
current 1mA, test voltage 2.8V ; 14) Transistor hFE test: 1-1,000
; 15) Power: 6F22(9V) x 1 ; 16) Size: 91 x 189 x 31.5mm ; 17)
Weight: 310g
Termination
Box
Light weight but high intensity, novel,artistic ,good dimension
stability, corrosion resistance , impact resistance,aging
resistance,and good flexibility.
Scart
Series-CS-201PB
1) Withstand voltage: DC 50V (50Hz) ; 2) Rated load: DC 50V 0.2A
; 3) Contact resistance: =<0.02mΩ ; 4) Insulation
resistance: >=500MΩ ; 5) Working temperature: -20 ~ 70oC
; 6) Life: up to 10000 times
Power
Supply of Amplifier Crust
1) Field oriented shell, good waterproof ; 2) Long time stable
working under full load, great power performance ; 3)
Anti-thunder, anti short circuit, anto recovery function ; 4)
Circuit transformer without indication ; 5) Max current: 8A
Explosion-Proof
Control Box
1) Some enclosures are combined into one unit ; 2) Built-in
components are mounted on the mounting rails ; 3) All the metal
parts are anti-corrosive
DIN
Rail
1) Width: 35mm ; 2) Matches with all kinds of DIN controllers and
standard components ; 3) Made in Europe, America, Japan and China
Power
Connector
1) Environmental temperature: -55 to 60oC ; 2)
Relative humidity: 98% (40oC) ; 3) Rated current: 20#
5A, 12# 35A, 8# 75A ; 4) Contact resistance: 20# 5mΩ, 12# 1mΩ,
8# 0.75 mΩ ; 5) Insulation resistance: >= 1000mΩ ;
6) Withstand voltage ; 7) 20#: 1,000V(AC50Hz) ; 8) 12#, 8#: 1500V
(AC50Hz) ; 9) Vibration 10 to 2,000Hz (14.7g) ; 10) Shock
acceleration 98g ; 11) Mechanical life 1,000 times ; 12)
Materials: a) Housing: PET T102 G30 UL94V-0 ; b) Contacts: H62Y ;
c) Pressing: H62Y ; d) Soldering: HPb59-1Y ; e) Spring: QBe2.0
Electrical
Line Cover
1) Material: silica gel ; 2) Packed in materials that will not
damage or contaminate the rubber
Profile
(SDK)
1) Length customized as per clients' requirements ; 2)
Performance: High strength, withstands high pressure, good
corrosion Resistance ; 3) Material: Cold- or hot-rolled steel and
custom ; 4) SDK is mainly used as the frame of SDK switch
cabinet.
Winch
1) Max line pull 8000 lbs (3620 kgs) ; 2) Rated line pull 8000
lbs (3620 kgs) ; 3) Motor: permanent magnet 1.6kW/2.2hp(12V);
1.8kW/2.4hp(24V) ; 4) Gear reduction ratio 210:1(12V); 210:1(24v)
; 5) Cable(Dia X L) 5/16" x 95'(8mm x 29m) ; 6) Drum size
2.48" x 9"(63mm x 228mm) ; 7) Overall dimensions 20.9 x
7.1 x 6.8" (530 x 180 x 173mm) ; 8) Overall dimensions in
dim shows up-setting styles ; 9) Mounting bolt pattern 10" x
4.5"(254 x 114.3mm) ; 10) Weight: 68.3lbs(31kg)
MMDS
Power Supply
1) Input voltage: 230V±10% or 115V±10% ; 2) Input frequency:
47Hz - 63Hz ; 3) Output voltage: 18V ; 4) Output current: 0.2A ;
5) Operating temperature: -10 ~ +55oC ; 6) Input
connection: European style, US style or as per customers'
requests ; 7) Output connection: 75, F female ; 8) Dimensions: 75
x 55 x 42mm ; 9) Weight: 230g. The power supply can be designed
with stabilized voltage output.
Junction
Box
1) Marine watertight junction box, JIS standard ; 2) Material:
synthestic resin ; 3) Code: 794833 ; 4) Protection class: IP56 ;
5) Voltage/current: 250V/20A
Computers,
Audio-Video, TV And Telephones cable
1) TV9607 TV cable reel ; 2) TV9603 TV connector cable ; 3) CA05
printer cable 25M/36F ; 4) UC12 USB cable AM/AF ; 5) PK08 patch
cable mold type ; 6) TFF6 TAE F plug TAE F jack ; 7) TF64
telephone cable 6P4C-6P4C ; 8) TF62 telephone adapter 2 X 6P2C ;
9) SC360 scart plug to 6RCA plug ; 10) 2 x audio out, 2 x audio
in ; 11) 1 x video in, 1 x video out ; 12) SC2225 scart adapter
21pin plug to 3RCA jack+min4pin jack ; 13) YS167 audio connect
cable 2RCA plug to 2RCA plug 90 ; 14) YS138 audio adapter cable
4RCA plug to DIN5 jack golden plated
AC
Solenoids
1) 14 models available ; 2) Rated stroke: 10-40mm ; 3) Rated
pull: 0.5-10kg ; 4) Rated voltage: AC 110V, 220V, 50/60Hz.
|