D2, M100,CST 180, LPG,LNG
We can supply most petroleum products like D2, Mazut 100,CST 180- 380, LPG,LNG , Jet Fuel, Auto Gasoline .etc Through our very reliable sellers in Saudi Arabia,GCCand Russia..

Chafing Fuel
With a burning time of 3 hours per can of 200 gms gel fuel, our gel fuel has a very high heat output and a longer burning time which ensures you get your moneys worth in performance and value. This makes our gel fuel the popular choice for hotels, restaurants, caterers and clubs. Our gel fuel also delivers heat consistency throughout the burning duration and will not leave your cooked food cold. Customers will enjoy hot food throughout the function. It burns without smoke, soot or odour and has low residue. The high viscosity of the gel assures no spillage as there is no dangerous free flowing liquid.

Bio-diesel
Dist temp. for 90%(v/v) recovery, Deg C= 346 ; Flash point, Deg C = 132 ; Sulfur Content, % (m/m) = <0,1 ; Cetane number = 53,4 ; Cu strip corrosion, classification = 1 ; Cold Filter plugging point, Deg C = -2 ; C residue 10%(v/v)dist residue%(m/m) =0,41 ; Ash content % (m/m) = 0,005 ; Water Content % (v/v) = 0,05 ; Sediment content, % (m/m) =<0,01 ; Viscosity at 40 Deg C, mm2/s = 4,163 ; Density at 20 Deg C, kg/l = 0,8886 ; Oxidation stability, mg/100 ml =<0,01

Petrol products
We can supply all kinds of petrol products like special oil, paint mineral spirit, printing pink mineral spirit, coarse crystal wax, extract oil, rubber mineral spirit and white oil.

Low Sulphur And Viscosity Fuel Oil
Specifications: Yield and Inspections of Atmospheric Residue. Boiling Range deg. C 350+ Method. Vol. Of % on crude 40.7. Density @ 15 deg. C g/ml 0.9352 IP365/D4052 ; Gravity deg. API 19.7 Calculation ; Specific gravity @ 60 deg F 0.9357 Calculation ; Total sulphur % wt.0.69 IP336 ; Pour point deg. C +39 IP15/D97 ; Viscosity @ 37.8deg. C cSt 470* IP71/D445 ; Nickel ppm wt.14 IP377 Mod ; Vanadium ppm wt.3 IP377 Mod ; Micro carbon residue % wt.5.9 ASTM D4530 ; Asphaltenes % wt.1.3 IP143 ; N-Heptane insolubles % wt.2.0 ASTM D893 ; Molecular weight 490 Calculation ; Calorific value MJ/KG gross 44.31 Calculation ; Sodium ppm wt.10.0 IP377 Mod ; Calcium ppm wt.12.0 IP377 Mod ; Potassium ppm wt.0.4 IP377 Mod ; Ash content % wt.0.001 IP4/D482

Fueling Nozzle
XIDE-80 specifications: 1) Outer diameter: 13/16", 15/16" ; 2) Thread: BSPT3/4", NPT3/4". XIDE-120 specifications: 1) Outer diameter: 1 3/16", 15/16" ; 2) Thread: BSPT1", NPT1". Outer packing: 10pcs/carton ; Carton dimensions: 44 x 40 x 34cm ; N.W.: 17kg ; G.W.: 18kg. XIDE-200 specifications: 1) Outer diameter: 1 1/2", 1 1/4" ; 2) Thread: BSPT1 1/2", NPT 1 1/2"

Jet Fuel
We can provide you with the following at competitive discounts: REBCO ; Blco ; Slco ; Jp54 jet fuel ; Jet a1 jet fuel ; D2 ; Mazut m-100

Furnace Oil
Furnace Oil: API 16.1 ; Flash Point Minimum 60 ; Viscosity Minimum 15 Degree C ; Max of 380. Density Min 50Degree C Max 0.970 ; Water Volume 10% ; Sediment Weight 1.5% ; Sulpher Content 3%

Fuel Oil
products: Gas oil ; Automotive gas oil ; D2 gas oil ; L62 gas oil ; Lpg ; Dpk ; Cst 180 ; Base oil ; Russian crude ; Bonny light crude ; Saudi light crude

Used Engine / Waste Oil
We are looking for used engine/waste oil from world wide.

D2, Mazut
Fuel oils available. D2, Mazut, Bunker C.

Automatic Gasoline Nozzles
For heavy duty, speed truck, bus and fleer service. If you operate a full service petrol station, refuel your own fleet, or manage a card-lock refueling location, the low cost, long life and durability of the AIER-120L high flow nozzle can help increase your productivity, sales and profits. Even, smooth, spray pattern - minimizes diesel foaming and false shutoffs. Three-position hold-open device with one finger control allows for easy flow rate setting. Dual poppet valves help to open nozzle against high pressure. Specifications: 1) Inter thread: NPT1" BSPT1" ; 2) Outer size: 1", 13/16" ; 3) Flux range: 0-90L/M (1"), 0-120L/M (13/16") ; 4) Nominal pressure: 0.18Mpa ; 5) Body: aluminum ; 6) Main stem seal: viton cased oil seal ; 7) Main stem: stainless steel ; 8) Gasket: buna-N O-ring, viton ; 9) Weight: 1.5kg/unit, N.W.: 12kg/8 units, G.W.: 15kg/8 units

Gasoline Additives
We offer poly-functional antiknock additive to the motorvehicle gasoline DMF-A and DMF-B. The octane-increasing effectiveness of the additive DMF-B: In the range of ONM values OCN 64-76 while putting-in to the basic gasolines in the quantity of 5%mas, the value of ONM is increased by 7-10 points; In the range of ONM values OCN 76-80 while putting-in to the initial gasolines in the quantity of 5%mas, the value of ONM is increased by 6-7 points. The preparation of the gasolines with the additive DMF-B is performed at input of the additive into the basic(initial)gasoline according to the simplest technology - mixing of the above mentioned components in the reservoir or the railway car using the circulating pump.

Fuel Oil
We have available slco, jet fuel, d2 and lpg.

Starting Fluid
Starts engines quickly and reduces drain on batteries. A small amount of dolphin starting fluid provides quick, smooth starting of gasoline and diesel engines in any weather. It can be sprayed directly into the air cleaner and contains an upper cylinder lubricant.

Alternative Fuels
Saves and economizes on diesel fuel consumption by as much as twenty (20%)percent. Biodiesel plus is a specially formulated clean burning, renewable alternative fuel and or additive for diesel engines. It can be used in its pure form or can be mixed petroleum based diesel. It cleans and decarbonizes fuel injectors, makes the engine run smoother and more efficient and reduces black smoke emmission which causes air pollution.

High Speed Diesel (D2)
1. Density:20 deg. C KG/m3 0.870 max ; 2. Color:2.0 max ; 3. Flash point, PMCC deg. C 57 min ; 62 max ; 4. Kinematics Viscosity 20 deg. C Cst 3.0 min; 6.0 max ; 5. Pour point deg. C # (*) min; 10.0 max ; 6. Cloud point # deg. C # (*) min; 5.0 max ; 7. Mercaptan Sulphur - 0.01 max ; 8. Acidity, # mg/1000cm3 5 max ; 9. Iodine number g/100g 6 max ; 10. Ash % wt 0.01 max ; 11. Total Sulphur % wt 0.02 min; 0.05 max ; 12. Copper corrosion (3 hrs 50 deg. C) 1A max ; 13. CCR on 10% residues % wt # 0.20 max ; 14. Cetane - 45 min ; 15. Distillation range: 50% Recovered Volume Deg. C280 max ; 90% Recovered Volume Deg. C350 max. Bacteria MCB Fibre/It 500 max.

Jet Fuel, Crude Oil, Fuel Oil, D2, REBCO, Urea 46%
We are direct to seller mandate for slco, d2, REBCO, jet fule, fuel oi, urea.