Angular Contact Ball Bearings
1) Quality standards: ABEC1, ABEC3. 2) Extensively used in: Machine tool main shafts ; Mill grinding wheel shafts ; Internal-combustion engine liquid gear boxes ; Worm reduction gears ; Electric drillers ; Centrifugal machines ; Pressure boosters.

Three / Four Point Contact Ball Bearings
These bearings accommodate both radial and axial loads in both directions. They function similarly to paired mounting angular contact bearings, but significantly save mounting space.

Angular Contact Ball Bearing
The raceways of both the inner and outer rings of these non-separable bearings are made with set contact angles. The balls are inserted using counter-bore construction, which allows a larger number of balls to be installed than in deep-groove ball bearings. We provide various combinations with pre-adjusted clearance to simplify assembly. Typical applications: speed reducers, automotive applications, construction equipment, pumps, printing presses, paper mill machines

Single Row Angular Contact Bearing
1) Can bear thrust loads only from a certain direction. 2) Usually combined with another angular contact ball bearing to balance thrust load. 3) Operating clearance or pre-load should be adjusted depending on requirement. 4) To avoid adjustment a special duplex bearing can be provided

Bearing
1) Little friction and high limited speed. 2) High rotating accuracy and low vibration level. 3) Non-standard bearings

Auto Air-Conditioner Bearing
Double-row and angular-contact ball bearings are the equivalent of two single-opposed angular-contact ball bearings. They have lines of contact converging outside the ball bearing envelope (as in a back-to-back duplex pair) or inside the envelope (as in a face-to-face pair). Ball bearings with externally converging lines of contact are much more resistant to overturning moments.

P4 Precision Angular Contact Ball Bearing
We are a professional supplier of all kinds of angular contact ball bearing in P4 precision. Their production are adopted the enterpriser standards in higher level than national standards. We have been exported these bearings to Western Europe, North America, South America and South Eastern Asia.

Angular Contact Ball Bearings
1) With raceways in the inner and outer rings. 2) The axial load carrying capacity increases with increasing contact angle. 3) The contact angle α is defined as the angle

Double Row Angular Contact Bearings
1) Load capacities are higher than deep groove ball bearings of same dimensions. 2) Used for bearing radial-axial combined loads or pure thrust loads. 3) Low operating friction and high limiting speed

Angular Contact Ball Bearing
1) Automobile steering gear bearings. 2) Little start-up moment and agile rotation. 3) Applicable to various mini automobiles. 4) Main specification range: a) Inner diameter: 10 ~ 80mm ; b) Outer diameter: 32 ~ 150mm ; c) Width: 10 ~ 50mm.

Double Row Angular Contact Ball Bearing
Four row cylinder roller bearing is made of vacuum melting high-quality bearing steel with designed optimize parameter. It has reliable performance with large radial loading and high limit rotary speed, equipped with inner and outer rings. It is easy to mount and dismount. This kind of bearing is widely applied for working roll and backing roll for cold and hot rolling mill. Four point contact ball bearing is made of vacuum melting high-quality bearing steel with reliable performance and is separate bearing, equipped with double semi-circle inner and outer ring. The contact angle is 35, bearing the bilateral axial load. This kind of bearing has single row and bi-row angle ball bearing function, under low and middle speed, comparing with other bearing, four point contact ball bearing can obtain the less axial free clearance, and large load and high limit rotary speed when axial preclearance is same.

Wheel Hub Bearings
1) Ring and ball material: GCr15 (Chinese standard), equals to SAE52100 (AISI), 100Cr6 (German DIN) and SUJ2 (Japanese JIS standard). 2) Grease: Ronex Mp from Exxon / Mobil, or Alvania R3 from Shell, or according to customers' requests. 3) Cages: nylon 66. 4) Seals: oil and wear-resistant nitrile rubber (NBR) with a sheet steel reinforcement. 5) Shields: SPCC (standard material for shields). 6) High quality. 7) Competitive price. 8) Small orders are acceptable

Angular Contact Ball Bearings
1) Material: GCr15 grade steel with oxygen content less than 20ppm. 2) Hardness for rings and rollers: 59 - 63HRC. 3) Bearing dimensions and tolerance levels comply with the latest ISO standards

Deep Groove Ball Bearing
The raceways of both the inner and outer rings of these non-separable bearings are made with set contact angles. The balls are inserted using counter-bore construction, which allows a larger number of balls to be installed than in deep-groove ball bearings. Single-row angular contact ball bearings can sustain radial, axial and momentary loads. However, any axial load must be applied in one direction. Due to their design,angular contact bearings will experience some amount of axial loading from any radial load that is applied.

Wheel Hub Unit
Features (compared to wheel bearings I series): 1) Easier preload setting. 2) Easier mounting process. 3) No need to fit to knuckles. 4) Integral seals (improved reliability). 5) Compact

Angular Contact Ball Bearing
1) Our angular contact ball bearings include three big categories: single row angular contact ball bearings, three-point-contact and four-point-contact ball bearings and double row angular contact ball bearings. 2) Single row angular contact ball bearings accommodate radial loads, acting simultaneously with a relative great axial load in one direction. 3) For axial load accommodation in both directions, the bearings are arranged in pairs against each other. 4) They have series of 70xx, 72xx, 73xx, 74xx, 79xx and inch series. 5) Contact angle is classified as C(15°), AC(25°) and B(40°). 6) Mounting ways have DT - Tandem, DF - Face to face, DB - back to back, TBT - two tandem and back to back, G - Universal. 7) Three-point-contact and four-point-contact ball bearings are also single row angular contact ball bearings, which require significantly less space in an axial direction than double row designs. 8) Double row angular contact ball bearings principally correspond to a matched pair of single row angular contact ball bearings

Angular Contact Ball Bearing
1) The rings and balls of our bearings are made of refined high-carbon chrome bearing steel. 2) The retainers are punched from super quality cold rolled steel plate or made of reinforced engineering plastics. 3) The shields are made of special material (SPCC JISG3141). 4) The seals are hot-pressed from oil-resistant rubber with phosphatizing steel skeleton. 5) Can be manufactured according to your drawings

Single-row Angular Contact Ball Bearing
1) The design of Single-row angular contact ball bearings is similar to one-single-row angular contact ball bearings. It is non-separable type. The basic design does not have filling slots and can accommodate equal axial loads in both directions. The ones with a larger outer diameter have filling slots in one direction and have pressed steel or machined brass cage. Bearings with E design have high loading capacity. They also have filling slots on one side which allows incorporating large numbers of balls. 2) They are not available with shields (non-rubbing type) and seals (low friction and rubbing type) on both sides. They are filled with lithium based grease which can inhibit rust and operate from the temperature of -30¡ãC to 110¡ãC.
3) Size: 7000 series, 7200 series, 7300 series, 4300 series, 5200 series, 5300 series. Suffixes with C, AC and B types are available.
4) Material: Made of bearing steel (GCr15).

Four Point Contact Angular Ball Bearing
1) Contact angle is classified as C(15¡ã), AC(25¡ã) and B(40¡ã). 2) four-point-contact ball bearings are also single row angular Contact ball bearings, which require significantly less space in an axial direction than double row designs. 3)Most have nylon 66 cage, but pressed steel cage can be supplied for some types.

Angular Contact Ball Bearings
Place of Origin: China. Features: 1) High-precision. 2) Low-noise level. 3) For reducing speed in automotive and construction equipment, pumps

Single or Double Rows Angular Contact Ball Bearing
1) High quality and low noise. 2) Quality standard: P0, P4, P5, P6. 3) Extensively used for heavy-duty machines

Wheel Hub Unit Of Two Generation
1)Outer ring rotating hub unit bearing with outer flange for mounting the wheel; 2)Inner ring rotating hub unit bearing with outer flange for mounting onto the knuckle; 3) Inner ring rotating tapered roller hub unit bearing with integral flange for mounting onto knuckle. Suitable for heavy-duty vehicles.

Angular Contact Ball Roller Bearing with Seal Ring
1) Has thick-walled outer rings, which can withstand the heavy radial load, impact load and prevent abrasion. 2) The sealed structure stops the pollutants entering the bearing on severe working environment, so as to ensure a long bearing life. 3) Main specification range: a) Inner diameter: 12 - 80mm ; b) Outer diameter: 40 - 200mm ; c) Width: 10 - 50mm.