Bearings Products and Supplier, Manufacturer
 Full
Ceramic Bearings
1) Out and inner ring: zirconia. 2) Ball: zirconia. 3) Retainer: PTFE, nylon,
PEEK or stainless steel. Full ceramic bearing is non-magnetic, non-conductive,
wear and corrosion resistant. It runs smoothly without oil or grease, which
means nearly no maintenance is required during working. It is especially
suitable for low and high temperature usage. At present, full ceramic bearing
has been applied in chemical, metallurgical, food, electronic and other
industry.
Clutch
Bearings
Pyc bearing is a specialized manufacturer of various clutch bearing.clutch
bearing incorporate conventional clutch release bearings and resin sleeves.
They also include a self-aligning mechanism that reduces noise and wear on the
diaphragm spring. These bearings are lightweight, compact in design, and have
improved dust- and water-resistance.
Thrust
Ball Bearings
Thrust ball bearings can handle loads in the axial direction only. Bearing
rings mounted on the shaft are called shaft washers, and those mounted in the
housing are called housing washers. Both washers contain raceways for the
balls. Thrust ball bearings are available as both single and bi-directional
types. The bi-directional thrust bearing incorporates a third washer and an
additional set of balls. This center washer is located in the axial direction
by a shaft shoulder and sleeve.Ceramic
Bearings
1) Ceramic bearings have excellence performance as special electrical and
magnetism resistance, wear and corrosion resistance, lubrication and
maintenance free when working, high and low- temperature resistance etc. So
they are suitable to be used in awful environment and special condition.
2) The rings and balls made of full ceramic material: ZrO2, SisN4 and Sic as a
standar structure, the cage made of PTFE. 3) Series available: single-row deep
groove ceramic ball bearings, self-aligning ceramic ball bearings, single
direction thrust ceramic ball bearings and angular contact ceramic bearings. 4)
Ceramic balls: all kinds of ceramic balls with the precision. Automotive
Bearings
Many kinds of automotive bearings available: such as wheel hub unit bearings,
clutch bearings and multi-tough bearings.
Adapter
& Withdrawal Sleeves
Adapter and withdrawal sleeves are devices used to mount and secure rolling
element bearings with tapered bores onto cylindrical shaft seats. This enables
the mounting or dismounting of rolling element bearings in a simple and
effective way for a variety of applications.
Angular
Contact Ball Bearing
Single-row angular contact ball bearings can sustain radial, axial and
momentary loads. However, any axial load must be applied in one direction. Due
to their design,angular contact bearings will experience some amount of axial
loading from any radial load that is applied. For this reason, they are often
used in pairs. We provide various combinations with pre-adjusted clearance to
simplify assembly. Typical applications: speed reducers, automotive
applications, construction equipment, pumps, printing presses, paper mill
machines Structure
Steel Shelf for Various Application
Our structure steel shelf is used in various fields: 1. Supporting steel
structure for kinds of automobile. 2. Outdoor construction project steel
engineering, like bridge, road rail, railway station, exhibition square,
residential house and commercial building etc. 3. Indoor supermarket cargo
shelf for showing and transporting, stair rail,hollow section etc. 4. Furniture
shelf for table, desk, bed, chair, stool etc. Ball
Bearing Units
These units consist of a double-sealed single row deep groove bearing, and cast
iron(or other material) housing in various configurations. Deep
Groove Ball Bearings
1) High quality and low noise bearings 2) Quality standards: ABEC1, ABEC3,
ABEC5, ABEC7 3) Extensively used in: Household appliances Automobiles
Motorcycles Power tools Electrical motors Water pump Agricultural machines
Engineering mine machines Textile machines Spherical
Roller Bearing
Used in agricultural machine such as combininb harvesting machine, air-blower,
paper-machine, textile machine, woodworking machinery, overhead crane moving
wheel and driving shaft, etc. Sintered
Part
Our sintered parts are widely used in applications like automobiles, auto bikes
/ auto cycles, gears, motors..
Self-Lubricating
Bearings & Bushings
SF triple layer composite material consists of 3 bonded layers: steel back
strip and sintered porous spherical bronze particles interlayer, which are
impregnated and overlaid with a polymer material Needle
Roller Bearing
Bearing is a specialized manufacturer of various needle roller bearing.
needle roller bearing features: 1) Drawn cup needle roller bearing ; 2) Radial
needle roller and cage assembly ; 3) Radial needle roller and cage assembly for
connecting rod ; 4) Heavy duty needle roller bearing ; 5) Cam follower and
track roller bearing ; 6) Thrust needle roller or cylindrical roller & cage
assembly Thrust
Roller Bearings
Thrust roller bearings are designed specifically to manage thrust loads and
enhance high-shock load resistance within industrial applications. These
bearings yield high-speed performance, true rolling motion and application
flexibility. Because thrust roller bearings can not support radial loads, ball
thrust bearings must be used with radial bearings. Even slight misalignments
can cause drastic load concentrations, so the thrust bearings must be kept
square with the shaft or used with self-aligning seats. However, the ability of
the self-aligning seat to follow shaft wobble or misalignments is still quite
limited. Angular
Contact Ball Bearing
1) Our angular contact ball bearings include three big categories: single row
angular contact ball bearings, three-point-contact and four-point-contact ball
bearings and double row angular contact ball bearings. 2) Single row angular
contact ball bearings accommodate radial loads, acting simultaneously with a
relative great axial load in one direction. 3) For axial load accommodation in
both directions, the bearings are arranged in pairs against each other. 4) They
have series of 70xx, 72xx, 79xx and inch series. 5) Contact angle is classified
as C(15°), AC(25°) . 6) Mounting ways have DF - Face to face. 7)
Three-point-contact and four-point-contact ball bearings are also single row
angular contact ball bearings, which require significantly less space in an
axial direction than double row designs. 8) Double row angular contact ball
bearings principally correspond to a matched pair of single row angular contact
ball bearings Thermoplastic
Bearing Housings
TP-P/F/FL/PA/FB available in black, green and white color. Material :
Thermoplastic Polymer. Made in china. Steel
Ball
Steel Ball features: 1) Carbon steel balls AISI1015. a) Size: 1.4mm to 30mm. b)
Grade: G2000 to G40 as per AFBMA. 2) Chrome steel balls AISI52100. a)
Size:1.4mm to 150mm. b) Grade: G2000 to G10 as per AFBMA. 3) Stainless steel
balls. a) Material: AISI304, AISI430, AISI440C. b) Size: 1.2mm to 25.4mm.
c) Grade: accordingly Spherical
Plain Bearings & Rod Ends
We manufacture a full range of spherical plain bearings, spherical thrust plain
bearings and rod ends. Materials available: chrome steel, carbon steel,
bronze, stainless steel, etc. Needle
Roller Bearing
Needle-cage assembly drawn cup roller bearings, light and mid-sized needle
roller bearings, and thrust needle roller bearings are suitable for conditions
requiring small space and high load capacity. They are widely used for gear
driving systems, automobile and engineering machinery turning systems, as well
as motorcycle motor connecting rods. Cylindrical
Roller Bearings
specialized manufacturer of various cylindrical roller bearing, cylindrical
roller bearings have exceptionally low friction torque characteristics that
make them suitable for high speed operation. cylindrical roller bearing
include: Single row cylindrical roller bearings ; Double row cylindrical roller
bearings ; Four row cylindrical roller bearings Sliding
Door Rollers
1) Used in window, sliding and vehicle 2) Outer coated nylon 3) Color: ivory,
orange, silver 4) Exported to the U.S.A. and Europe Linear
Motion Bearings
1) high precision linear ball bushings. 2) Metric and imperial size available.
3) Shaft size from 10 to 90mm Water
Pump Bearing
Water pump bearings are primarily used in automotive water pumps, basically
consisting of standard double row bearings.These bearings are available in two
main types: 1) Ball-ball: with two rows of balls; WIB, BWF, WS, WK, 885000. 2)
Ball-roller: with one row of balls, one row of rollers; WIR, WKH, 665000
series, etc. Roller
Bearings and Other Bearings
Including series: 1) Needle roller bearings ; 2) Tapered roller bearings ; 3)
Linear motion bearings ; 4) Spherical plain bearings and rod ends ; 5) Water
pump bearings Metric
Taper Roller Bearing
Place of Origin: China. 1) Bearing type: 30203, 30204, 30205, 30206, 30207,
30208, 30209, 320/28. 2) Quality: meet European standards Spherical
Plain Radical Bearing
1) Material: GCr15 grade steel with oxygen content less than 20ppm. 2) Hardness
for rings and rollers: 59 - 63HRC. 3) Bearing dimensions and tolerance levels
comply with the latest ISO standards
|
