Jacket Boiler
1) This jacket boiler has many types, and we can produce according to customers' demands. 2) Can heat by steam or oil. 3) Sugar and other flavors can be mixed by agitator. 4) Capacities: 150L, 300L and so on.

Circulating Fluidized-Bed Boiler
1) Rated evaporation capacity: 20T/h, 35T/h, 45T/h, 50T/h, 65T/h, 75T/h, 90T/h, 120T/h, 130T/h, 220T/h, 240h. 2) Rated pressure: 2.45MPa, 3.82MPa, 50barg, 90barg, 3.82/5.29MPa, 3.82MPa, 9.8MPa, 3.82MPa, 9.8MPa, 9.8MPa, 9.8MPa. 3) Designed coal type: coal gangue, tinpot soft coal, high sulphur lean coal, sulphur lean coal, soft coal, paper residue, soft coal, blind coal, lean coal, oil shale, bituminous coal, glance coal

Blind Coal Fired Steam Boiler
1) Reasonable disposed heat surface and burning device, heat efficiency is 4~5% higher than national standard. 2) Reasonable flue speed design, heating surface without scattered flue and no abrasion, under the condition of no scoot blowing, which can keep the boilers running high efficiently, with full load and safely. 3) Adopt high radiation arch, while guarantee the blind coal fire on time burn to improve the burning rate. 4) Equipped with steel-made threaded pipe air preheater, supply reasonable temperature hot wind, boost fuel fire timely and burning completely. 5) Enlarge the grate area, improve the burning time of fuel, decrease the heat loss of incompletely burning. 6) Adopt big grate, leak no coal, ventilate equally, clear airway itself, burn steadily. 7) All single back way design, adopt reasonable injected circulation for hot water boilers, medium speed in back way of heat surface is higher than national standard. 8) Soot idiomatically separate at the exit of boiler furnace, reduce ash content and lessen abrasion of back heat surface. 9) Compact structure makes its installation volume smaller than other type, shortens installation period and reduces the cost of boiler house

High Pressure Boiler
Surface crack check for boiled ceramic. Pressure up to 20kgf, Digital temperature control, Timer with alarm indicating device.

Fuel Coal, Hot Water Boiler
The boiler body is single cylinder type, portrait arranged; there are left and right 2 rows of fire pipe bundles inside boiler cylinder to form convection heat receiving surfaces, the boiler cylinder and water cooling walls at both sides shape the furnace radiation heat receiving surfaces; the combustion equipment uses light chain grating; exit shop in whole machine quick fitting type. The electric control realizes grating step free timing, the extreme parameter alarm and inter-lock protection. Features of this series of boiler: compact in structure, small in volume; convenient in installation, cheap in fundamental construction; mechanized coal feeding and cinder removing; the output of the boiler is gigantic; and high in efficiency. 

Wall Mounted Gas Fired Boiler
Gas Type: Natural gas, LPG, Artificial cola gas. Rated output / input capacity (KW) : 27. 8 / 29. 8. Efficiency: 93. 3%. Min. Output / input capacity for heating (KW) : 10. 5 / 12. Min. Output / input capacity for hot water (KW) : 9. 4 / 11. 4. Max. Heating water temperature: 90. Range of heating water temperature: 40-85. Expansion Tank Volume (L) : 8. Heating Area (m2) : 80-250. Power supply: 220V / 50HZ. Fuction: Heating & Hot water

Chain-Grate Barrel Furnace
1) Energy-saving. 2) High efficiency. 3) A range of structures available. 4) Rational design. 5) Advanced processing capabilities. 6) First-class quality, complete after-sales service.

Industrial Boiler Components
1. Industrial boiler components, alloycasting, high temperature resistant alloy and corrosion-resistant. 2. Nonstd casting according to client's design used in different capacity boilers. 3. Industrial boiler components used in power station. 4. The products solved the technical difficult for huge industrial boiler components to work at upto 1, 200 degrees high temperature and under specific corrosion environment, and open a new application field of heat and corrosion-resistant alloy. 5. Products including pipe clip, abrasive-resistant housing, nozzle and alloy casting

Vessel Welding Rotator
The rolling bed includes the self-alignment, the adjustable, the vehicle, the tilting and the anti-drift types. The rolling bed is used to weld, polish and assemble the cylinder-shell, and to line the shells with rubber. The self-alignment rolling bed can be aligned by itself according to the size of the tank, the adjustable rolling bed can be adjusted using screw arbor shifts and conventional power grading. They can be controlled with AC frequency converter, and the linear velocity is displayed by the digital.

Directly Heated Hot Water Boiler
1. Three-pass and wet back structure, a decent shape of rounded upper part and quare lower part. 2. Big hearth technology: increase radiated area, decrease emission of NOx. 3. Big flue gas tube: reduce the resistance of smoke flowing and consumption of electricity.. 4. Intelligent control system: automatic running, multi-boiler controlling and remote monitoring is available. 5. Fiberglass heat preservation: less heat loss and low surface temperature. 6. Complete pothook type faceplate design: fine appearance, easy to install, assemble and maintain. 7. Surface treatment with anti-bask and transfer-color resistant powder, keep the original color for a long time. 8. Return water enter into from the top of the boiler, make an excellent water circulation and a small current resistance. 9. A condenser is optional for gas-fired boiler. It is possible to save 12% fuel and decrease noise 20~30dB. 10. Applicable fuels: gas,oil,dual fuel. Applications: 1. Mainly providing heating through radiators, especially fit for use in residential areas, hospitals, schools, banks and so on. The outlet water temperature is 90 degrees. 2. Providing heating for central air conditioning system with water-water heat exchangers.

Small Radius Bifurcate Bending Tube
These assistant boiler equipments and boiler accessories are widely used in pharmacy, sanitary, light industry, chemical industry and service fields.

Hopper Bottomed Steel Silos
1) Hopper bottomed silos are automatic-flow unloaded with quality cleaning system. 2) They are widely used for storage of seeds, flour, feed, cement and chemistry, which need to be cleaned continually. 3) With solid basic structure the conical- bottom has very strong strength. 4) There are three kind of angles, 40 degrees, 45 degrees and 60. degrees, among which the 60 degree conical-bottom is usually used to store larger pellet and powdered materials of high viscosity

Electric Heat Treating Oven
1) Load quantity: 20,000 - 22,000pcs. 2) Heat-treatment time: 2 hours. 3) Heat-treatment time: 1.5 hours (attacca). 4) Heating tubes: 2kW x 6pcs, 1kW x 3pcs. 5) Power: 380V, 50Hz. 6) Inner dimensions: 1,420 x 1,100 x 1,160mm. 7) Overall dimensions: 1,520 x 1,230 x 1,950mm. 8) Total weight: 660kg

Heating Boiler
We is very proud of its heating boilers used for centralized heating of buildings. There have been introduced as many as 22 types and most of them are solid fuel and a few ones - liquid and gaseous fuel. They are capable of heating both individual and public premises, which area ranges from 80 to 1000 m2. Therefore it is evident that a customer may easily choose the boiler, which capacity will optimally correspond to the heated premises and which will efficiently, economically and ecologically supply warmth to the required rooms.

Gas Boiler
1) Modified European technology to meet the different requirements in China. 2) Constant shower temperature. 3) Built-in temperature sensor. 4) When initial operating sensor fails a standby will start up automatically. 5) Intelligent operation panel imported from the USA. 6) Timer controlled temperature to save money and gas. 7) 4 different temperature settings. 8)Suitable water pressure:0.05Ma--0.8Mpa

Electric Steam Boiler with Steam Iron
1) Temperature is automatically controlled. 2) Heat indicator light. 3) Electric steam iron. 4) Specially designed soleplates that prevent water leak. 5) Compact design with fast steam built-up. 6) Suitable for small garment factories, sample makers, and laundries. 7) Usage of up to 3 hours for each water refill. 8) Boiler capacity: 2.5L

Steam Boiler
We can produce and offer steam boiler, coal buring steam boiler, oil burning steam boiler, natural gas and LPG steam boiler, the capacity is 1--20 tons, we has special installation team.

Organic Heating Carrier Boiler
Organic heat transfer heating boiler is a new type of thermal equipment, using oil as fuel, to take heat conduction oil as circular media for heat supply. 1. Capacity: 100,000kcal. - 12,000,000kcal. 2. Rated working pressure: 0.7Mpa - 1.0Mpa. 3. Rated feeding oil temperature: 270-450 degrade. 4. Heat affection: 70-80.34%. 5. Fuel: oil. 6. Type: vertical or horizontal

Thermal Oil Boiler
1) Rated heat supply quantity: 0.2MW, 0.35MW, 0.5MW, 0.7MW, 0.9MW, 1.2MW, 1.4MW, 1.8MW, 2.3MW, 2.9MW, 3.5MW, 4.7MW, 5.8MW, 7.0MW
2) Rated pressure: 1.0MPa. 3) Oil-out temperature: 320^oC. 4) Designed fuel: coal, light oil, heavy oil, natural gas. 5) Thermal efficiency: >80%

Light Oil Burner
Features: 1) Can be adapted for use with any type of burning chamber. 2) Mechanical pressure atomization. 3) Changing the volume of air and the combustion head provides the best burning parameters. 4) Can directly remove the atomization device without disassembling the burner from the oven or boiler; thus ensuring convenient maintenance. 5) When using bio-diesel (vegetable oil as raw material), the burner needs to be equipped with an extra hose, linear filter and oil pump. 6) A flange and insulation sealing washer connect to the boiler, which is equipped with two hoses, a linear filter and a nozzle. 7) We can offer a longer combustion head if required by clients. 8) A hydraulic regulator is used to adjust air flux in the first and second sections, and is collocated to avoid heat loss at the time of stopping. The burner unit includes: 1) Light aluminum alloy fan parts ; 2) A high performance centrifugal fan ; 3) Burning air inlet with flux regulating device ; 4) Slip-on flange is matched with various boiler flanges, which can adjust the position the burner extends to the heating furnace ; 5) Steel combustion head with stainless steel nozzle and steel flame plate ; 6) Three-phase motor that drives the fan and oil pump ; 7) Gear pump with booster and global valve ; 8) Regulating pole and atomization unit with on / off control nozzle ; 9) Servomechanism and burner instruction equipment that meet the European E230 standard ; 10) Ionization electrode for flame inspection ; 11) Control panel includes: on / off switch, selector of the first segment / second segment, indicator of operation and failure ; 12) Terminal connecting electricity, temperature controller and burner, also controls operation of the second flame section

4MT Single Cylinder Coal Steam Boiler
The boiler is with single cylinder horizontal instantly installed three-stroke smoke fire tubes. The fire tube is of low investment, convenient installation, quick start-up and reasonable structure covering a small area. The main structure features are as follows: 1) Large heated area ; 2) Light chain-grate stoker, reliable, small coal leakage, good smoke and dirt elimination, and time saving for installation and maintenance ; 3) Reasonable wind distribution facilitates for fuel burning ; 4) Increased effective area of the boiler bar, improved burning extent, and great cola adaptability ; 5) Step-less shift of the boiler bar ; 6) Automatic exported tube plate welded at the front-back tube plate with top quality

Cold Drawn Seamless Stainless Steel Pipes and Tubes
1) Type: austenitic. 2) Process method: cold drawn / cold pilgered. 3) O.D.: 10 - 219mm. 4) W.T.: 1 - 13mm. 5) Standards: a) ASTM (ASME) ; b) A213 / A213M (SA213 / SA213M) ; c) A269 / A269M ; d) A312 / A312M (SA312 / SA312M). 6) Widely used to manufacture outdoor equipment building materials, heat-resistant parts and parts that are difficult to make heat treatment for chemical, coal and petroleum industries that have high requirements for their intergranular corrosion resistant proper ties

Boiler
The silver-catalysed process produces formaldehyde by reaction of methanol vapour and air on a silver catalyst. Oxidation and dehydrogenation of methanol are the basic mechanism of the silver-catalysed route. Methanol is vaporised in an evaporator and the vapours mixed with air will go through the reactor containing a bed of pure silver in a granular crystalline form. The reactor is supported above a steam boiler so that the reaction products pass through the boiler tubes before passing to further cooling stages and produce steam (heating transfer between the reacted gases and water). The reacted gases containing formaldehyde, methanol and water are condensed and cooled in passing to a circulating absorber column followed by a first methanol scrubbing system and in a second step a water scrubbing system for the effluent gases. The aqueous formaldehyde-methanol is removed from the absorber to a distillation column to separate methanol and aqueous formaldehyde. The methanol is returned to the process as reaction feed and the aqueous formaldehyde up to 55% formaldehyde with 1 % or less of methanol is stored into tanks. The process vent gas (after scrubbing) which contains approximately 20 % hydrogen and small amounts of methanol, formaldehyde, and methyl formiate are burned in a boiler to produce steam.

Control Boxes and Temperature Controls
1) Contorl box LBS53: a) With GEOX ; b) Replacement for Riello control unit, 530SE ; c) For Riello, 40G ; d) For oil burner G3, G5, G10, G20 and G20S. 2) Control box LBS24: a) With GEOX ; b) Replacement for Landsi control unit LOA24.171 ; c) For 1-stage or 2-stage atomizing oil burners up to 30kg/h. 3) Temperature control LBS50: a) With GEOX ; b) Replacement for Landis temperature control, ROB50 ; c) For Weishaupt burner