DC Centrifugal Blower
1) Product name: DC centrifugal blower. 2) Voltage: 12V DC, 24V DC. 3) Input current: 5.5A, 2.8A. 4) Speed: 4,400rpm. 5) Air volume: 3.0m³/min. 6) Static pressure: 550Pa.

Centrifuging Decanter
The centrifugal machine model LW is a kind of centrifugal machine which separates the floating liquid by way of sinking of the centrifugal machine and unloads the material by screw. With the full speed, he machine can continuously input the material, separate and unloading the material, it can be used for solid-liquid separation, classification of particles, clean of liquid for floating liquid whose solid-phase density is 2-40% (the fineness of particles is 0.005-2mm). It has the advantages of continuous operation, large treatment capacity, small unit power consumption, tight construction, convenience of maintenance and repair, etc. It is particularly suitable for separation of floating liquid whose regeneration of filter cloth is difficult and the changing series for density and fineness of particles are quite large..

Straight Centrifugal Flour Mill
The national IPR product-Straight Centrifugal Flour Mill is our latest type which is designed by our experts who have long experience and hard research in mill equipment. Straight Centrifugal Flour Mill has opened a new time of industrial flour mill. And Straight Centrifugal Flour Mill is high efficiency. Straight Centrifugal Flour Mill is low energy consumption. Straight Centrifugal Flour Mill Usage: The Straight Centrifugal Flour Mill is used to grind various non-inflammable and non-explosive stuff in mining, building, chemical, metallurgical industry, etc. Straight Centrifugal Flour Mill can grind high, medial and low hardness material whose Moth's hardness is below 9.5,such as silica carbide, zirconium, quartz stone, granite, soap stone, calcium sulphate stone, glass, etc. Straight Centrifugal Flour Mill Working Principle: The motor of Straight Centrifugal Flour Mill drives the rollers suspension frame through flywheel and shaft,and the rollers will rotate around the ring with the rollers suspension frame. Deduster will eliminate the dus, meanwhile carry away the heat.

Centrifugal Separator
This machine products are widely used in degum, de-soap and water washing technology in vegetable oil refinery. It can also be used for refinery of animal oil and mineral oil .And liquid-liquid, liquid-solid separations of light industry. Chemical industry, pharmaceutical and food industry.

Centrifuge
Adapted to the special chemical laboratory centrifuge, food, pharmaceutical, environmental protection, mining, teaching laboratories, Separation Process parameters can be used to identify materials that can be used as trial production technology products. The centrifuge can be controlled motor brake with their feet, variable speed operation is intermittent, such as electricity consumption characteristics Test parameters important to ensure stability and rational, in line with the GMP requirements on design and manufacturing.

Centrifugal Cast Tube
This product adopts centrifugal casting technology. The material is high nickel steel or low nickel steel ferroalloy, or the material provided by customers. It has good high temperature oxidation and high temperature creep resisting performance. The product is 100mm - 4,500mm length, 70mm - 700mm OD, and 50mm - 670mm ID.

Centrifuge Machine
LWL model centrifuge is a horizontal screw discharge filtering centrifuge. It has the advantages of smooth rotation, good washing results, large treatment capacity, and high production efficiency. It can feed, wash, dewater and discharge automatically and continuously during the rotation at full speed. It's efficient separating equipment, and widely used in chemical pharmaceutical, food metallurgical, mine industry, etc. It is suitable for separating of suspended materials whose 8-10 percent grain is lineal and crystalline solid-phase grain with diameter between 0.13mm and 5mm (0.2-2mm butler), such as citric acid, salt, fruit juice, sulphate, etc..

Three-Column Centrifuge
Its motor is controlled by frequency speed controller and it moves the drum through driving system to spin round the main axis to form centrifugal field of force. The liquid material enters the separating area directly from one side of the drum. Under affection of centrifugal field of force, the liquid material is thrown towards the wall of the drum, and then the liquid enters machine shell through filter cloth and the hole of the wall and falls down on the bottom of machine to discharge through outlet hole. The solid phase leaves in the filter cloth. The thickness of material is controlled by a special detector of material location. Water is poured through the washing tube to wash the material. After dewatering, the drum slows down and the solid phase is scrapped away by scraper then discharges through the outlet located in the drum. The parts of the machine touched with material use stainless steel, carbon steel, and titanium alloy. Main purposes: It is used to filter suspension where solid phase is particle, especially suitable for the poisonous, inflammable, explosive, corrosive material and working environment. Well not for textile with long fabric and others that not easy to scrap.

Low Noise Multi-Vane Centrifugal Ventilator
low noise multi-vane centrifugal ventilator has been designed and manufactured by our factory in order to adapt to the requirements of the increasingly developed purification industry, with environmental protection and noise reduction in mind. The fan features a multi-purpose optimized design for various pneumatic parameters, such as noise and efficiency. It fulfills the finest performance matching of the overall frame with sound air-operated performance. The paddle-wheel and pulley have been implemented with strict static and dynamic balancing correction; therefore, runs smoothly with low noise, large flow, little vibration, and is long lasting. It is widely applicable for kitchen exhaust of range hoods, ventilation air-exchange in public places such as bathrooms, hotel restaurants, and snack counters. It is also fit for use in the production equipment of grain, chemical, and plastic machinery.

VT180 Shade Pole Centrifugal Motor
Specifications: 1) Rated voltage: AC 220V ; 2) Power frequency: 50/60Hz ; 3) Output power: 14W ; 4) Input current: 0.3A ; 5) Output speed: 2700/3250 r/min ; 6) Air volume: 30m3/s ; 7) Pressure: 5.5 mmhgo ; 8) Starting voltage: AC187V ; 9) Insulation class: B ; 10) Noise: 42Db (A) ; 11) Coil temperature rise: 75k ; 12) Using environment temperature: -12~40 degrees Celsius ; 13) Dielectric strength: AC 150V 50Hz/min ; 14) Insulation class: >100M ohms ; 15) Using life: >9000h

Three-column Bag Lift Top Discharge Centrifuge
Features: 1) Suitable for separating suspensions with solid grains larger than 0.01mm. 2) Especially suitable for filtering poisonous and inflammable materials. 3) Widely used in chemical, pharmaceutical, food, light industry and other trades. 4) Most commonly used for gypsum, ferric sulfate, nickel sulphate, copper sulphate, potassium chloride, acetate, borax, soda, rubber additives, dye, plastic rawmaterial, soap, grease, resin, salt, gourmet powder, food additives, vitamins, herbicides, insecticides and dewatering of copper, zinc, aluminum and other mineral powders. Working principles: 1) Airtight equipment. 2) Programmed operation, interval operation and hanged bag unloading at alien land. 3) The material is fed from the upper into the rotary drum. 4) Under the centrifugal force function, the liquid passes through the filtering medium and discharges out of the machine. 5) The solid is left in the rotary drum. 6) After the machine is stopped, the filtering bag and liquid-block plate are hanged out and carried to the fixed site to unload the material. 7) Advantages: large capacity, high efficiency, simple operation, fast unloading, good guarding function, clean surrounding, low labor strength

Centrifugal Screen
Main application: Being an ideal screening equipment applied in pharmaceutical, chemical, foodstuff trades, etc., this machine is particularly used for screening of high fiber, high viscosity, high humidity, electrostatic and easy blocked materials. Working principle: 1) Material is fed into the screen box through screw conveyor 2) Continuous rotation of the vane pushes the material forward 3) Fine material is fallen from the screen 4) The coarse material is further advanced and discharged from the coarse port, and thus reaching the ideal screening effect.

Centrifugal Pumps
1) Pump body: cast iron. 2) Impeller: brass. 3) Motor housing: aluminum. 4) Mechanical seal: stainless steel. 5) Shaft: 45# steel. 6) Insulation class: B. 7) Protection: IP44. 8) Single phase: 220V/50Hz, 110V - 127V/60Hz

High-speed Centrifugal Spraying Dryer
The principle of this kind of spraying drying atomizer is that liquid materials are thrown out and atomized by centrifugal force from the edge of the dish that is rotating at high speed (linear speed at 90 to 160m/s). The whole system adopts such a style to dry, that is, hot air medium open circulation plus materials flowing concurrently. Features: 1. Short drying time due to large surface area of droplet groups. 2. Power has small granule (80 to 200 meshes) and good flow ability. 3. Large flexibility of operation. 4. Heat utilization rate is higher than that of other spraying when air temperature is over 150°C.

Worm / Screen Centrifuge
1) Suitable for suspension liquid of rigid grains or fiber whose bulk concentration of solid and liquid-phase is 10 - 60% and equivalent diameter of solid grains is ≥80μm that can be normally separated or dewatered centrifugally. 2) Can lower the heat and drying cost consumedly, and even omit the drying processing. 3) Continuous feeding and continuous unloading. 4) With washing function. 5) Suitable for materials which require washing and de-watering. 6) All processes can be finished at once

Centrifugal Pump
1) IP44.2 poles, class B/F insulation. 2) Single-phase feeding with incorporated motor protector and capacitor permanently connected. 3) Three-phase feeding protection is to be supplied by the user. 4) Continuous performance. 5) Suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. 6) These pumps should be installed in a covered area, protected against the weather

Centrifugal Fan
1) High efficiency, low noise, large volume flow and compact construction. 2) Sizes: 200mm. 3) PPM: 1,300. 4) POWER: 104W. 5) 230V / 50Hz

Three-Column Centrifuge
1) The drum of main machine is controlled by frequency speed controller. 2) Non-explosion protection for the whole machine: the main machine adopts full-closed filling nitrogen gas system, on-the-spot operating cabinet and hydraulic station, safe and flame-proof, which is specially suitable for inflammable, explosive and corrosive material and working environment. 3) When feeding, the location of material is monitored by radio frequency admittance sensor produced in America without the possibility of overloading. 4) PLC auto control, with DCS nipple, the whole operating processes of centrifuge can be controlled automatically

4 Point Bag Lift Top Discharge Centrifuge
1) Widely used in the chemical and pharmaceutical industries. 2) A kind of seal type filtering equipment. 3) Used to separate suspension of which solid grain is larger than 0.01mm

Tripod Type Bottom-Unloading Centrifuge
SF series centrifuge is a kind of filtering equipment which adopts tripod type, man-unloading from the bottom and interval operation. Under the function of the centrifugal force, the liquid passes through the filtering medium and discharges out of the machine. The solid is left in the rotary drum.After the speed reduces, the material is scraped off from the rotary drum wall and discharged out by man. It is suitable to separate the suspension whose solid grain is larger than 0.05mm,its thickness is larger than 5-60%(grain,crystal or fibre state). 1000 gourmet powder type centrifuge is a kind of special centrifuge which is developed for the gourmet powder manufacturers. It adopts frequency driving. Feeding and spinning-dry two grade speeds. The sections which touch liquid and soli gourmet powder are all made of food grade high-quality stainless steel to meet the healthy demands. It is specially used to separate suspension like gourmet.

Centrifugal Water Pumps
1) Centrifugal water pump have small size, ligh weight, advanced structure. 2) Fitting and disassembling conveniently. 3) Liquid for absorbing: clean water or liquid with n≤5°, E and t≤60°. 4) Pump outlet direction: can rotate with the degree of 90°, 180°, 270° according to the need of installation.