Machining Tool
1) Dimensions of the working table equally divided into 8 sections: 750mm, 29.53". 2) Dimensions of the working table equally divided into 4 sections: 120mm, 4.72". 3) Positioning accuracy of the working table of 8 equal sections: S, ±5. 4) Positioning accuracy of the working table of 4 equal sections: S, ±30. 5) 45 degrees positioning time of the working table of 8 equal sections: S, 3. 6) 45 degrees positioning time of the working table of 4 equal sections: S, 3. 7) Taper of spindle boring of power unit: BT40. 8) Speed of power unit (stepless) (r/min): 300-2,500. 9) Max. stroke of power unit (mm): 200. 10) Feed speed (stepless) (mm/min): 10-2,000. 11) Fast motion speed (mm/min): 16,000. 12) Dimensions of lathe tool: 2,500 x 2,450.

Drill Chuck
1) Unified body of chuck reduces the length of tool and improved working accuracy and superior durability. 2) Relaxation prevention mechanism and automatic incremental tightening feature. 3) Chuck never detached at the sudden stop of main shaft

Press Brake
Steel-welded construction, vibration to eliminate stress, with high strength and good rigidity. Hydraulic top-drive, steadiness and reliability. Mechanical stop, steel torsion bar to maintain synchronization, high precision. Synchronization, high precision. Motorized-adjusting device of back gauge and rams stroke, fine adjusting by handwheel, numerical display. Deflection compensation unit installed on the top die. Manual crowned bottom die holder is adopted of the machine above 250 tons, length 4000mm.

Engine Lathe
1) Precision ground and supersonic frequency hardened bed ways. 2) The spindle is supported with precision roller bearings

16mm Drill Press
1) Power: 230V 50Hz 450W. 2) Chuck: 16mm. 3) Spindle stroke: 60mm. 4) Spindle taper: MT2. 5) Speed change: 12. 6) Column diameter: 58mm. 7) Working table: 205 x 190mm. 8) Base size: 340 x 204mm. 9) Total height: 840mm

Sawfish Tyre Buffing Blade
We supply Sawfish Hacksaw blades, Sawfish Wood band saws, Sawfish Mitre saw blades, Sawfish Reciprocating saw blades, Sawfish Jigsaw blades, Sawfish Fret saws, Sawfish Meat/Bone saws, Sawfish H.S.S Circular saws, and Sawfish Tyre Buffing blades.

Vertical Machining Center
1) Table size: 1120 x 560mm. 2) Loading capacity: 750kg. 3) X-axis travel: 1020mm. 4) Y-axis travel: 560mm. 5) Z-axis travel: 600mm. 6) Distance from column to spindle center: 629mm. 7) Distance from table surface to spindle nose: 135 - 735mm. 8) Cutting feed rate (X, Y, Z ): 1 - 10,000 mm/min. 9) Rapid feed rate (X, Y, Z): 20/20/18 m/min. 10) Max. spindle speed: 8,000r/min. 11) Spindle taper: No.40. 12) Spindle drive motor: 7.5/11kW (70/47N.m). 13) X/Y/Z axis motors: 3/3/3kW. 14) Tool storage capacity: 20. 15) Tool shank: BT40. 16) Max. tool weight: 7kg. 17) Max. tool diameter: φ100/φ130 mm. 18) Tool change time (tool to tool): 6 - 8secs. 19) T-slots (No. x width x distance): 5 x 18 x 100mm. 20) Positioning accuracy (X, Y, Z): (ISO) 0.025mm, 0.020, 0.020. 21) Repeatability (X, Y, Z): (ISO) 0.010mm, 0.008, 0.008. 22) Controller: FANUC 0i-MC. 23) Air pressure required: 0.4 - 0.6MPa. 24) Machine size (L x W x H): 2,820 x 2,530 x 2,500mm

Glass Edge Finishing Machine
The machine is the specialized equipment to remove the sharp cuts after glass cutting the abrasive belt running at high speed, can simultaneously grind and remove the sharp angles around the glass sheets to prevent machine damage or person injury due to sharp angles. It can also lengthen the service life of equipment..

CNC Lathe
1) Model: CNC Lathe. 2) Max. swing over bed (mm): 400. 3) Max. swing over carriage (mm): 160. 4) Max. workpiece length: 750mm. 5) Spindle bore: 58mm. 6) Spindle speed range/step: 100-2,000/stepless. 7) Max. carriage travel ( X x Z): 260 x 500mm. 8) Max. feed speed (X x Z): 6 x 8m/min. 9) Min setting unite: 0.001 x 0.001. 10) Tool quantity (pc): 4/6/8. 11) CNC control system: Fagor, Fanuc, Siemens. 12) Power of moor coolant/lubricant: 120W. 13) Main power motor: 5.5/7.5kW. 14) Net/gross weight: 1,800/2,000kg. 15) Compact, space-saving design. 16) Linear tool-changer or electric tool post with reliable quality. 17) Slant bedway with 45 degrees angle for easy chip removal. 18) Variable speed control 100-2,000rpm, ensuring heavy-cut at low speed. 19) Fully-enclosed design enduring sate and clean operation. 20) Enclosed spindle head stock with precision concentricity and low vibration. 21) Power main motor drive. 22) Hardened and ground guide way

Tube Bending Machine
1) Adopts Japanese Mitsubishi high performance PLC programming to control automatically. 2) Main mechanical parts are made of special steel to be forged, after thermal treatment, making it wear well. 3) Two shafts bending synchrony molding, prompt, accurate, strong pipe bending capacity. 4) Can set the different angles to bend the two shafts, it is mostly suitable for general dual orientations bending machining. 5) The bending angle can control from 0 degree to 180 degrees. 6) With the functions of hand moving, semi-automatic, full automatic functions and matches emergency off device

End Milling Machine
Our horizontal end-millers are specially designed for milling sets of profiles  in which the cutter unit needs to be changed several times in the same set. Machine is equipped with a quick-release cutter holder making different applications on profiles quicker and easier. The machine is also equipped with a hydro-pneumatic cylinder to ensure vibration free and smooth end milling operation. The travel speed is adjustable. The cutting zone is fully guarded to protect the operator in all the machining operations. Standard Equipment: Air gun ; Pneumatic twin vertical clamps ; Profile support with cutter stack holder ; 2 quick-release cutter holders. Optional Equipment: Milling cutter set ; Profile fixtures

Surface Grinder
Longitudinal stroke: 340mm. Lateral stroke: 170mm. Grinding height: 210mm. Area of table 152mmX304mm. Grinding wheel 180mmX32mmX13mm. Power of motor 0. 55kw. Overall dimensions (LXWXH) 930X780X730. Case dimensions (LXWXH) 750X720X1060mm

Micro Multi-Purpose Machine
Specifications: Cutting: 1) Process exact: 0.02mm. 2) Swing over bed: 140mm. 3) Distance between centers: 250mm. 4) Spindle taper: MT#2. 5) Tailstock taper: MT#1. 6) Spindle speed: 100 - 2,000rpm. 7) Range of threads: a) Metric: 0.5 - 1.25mm (5 thread pitches) ; b) Imperial: 16 - 24TPI (5 thread pitches). 8) Output power: 150W. Drilling and milling: 1) Max drilling / milling capacity: 10mm ; 2) Travel of drilling / milling spindle: 30mm ; 3) Drilling / milling spindle speed: 100 - 1,300rpm ; 4) T-Slot: 8mm ; 5) Output power: 150W

Circular Thread Rolls
Offers circular/cylindrical thread rolls/rolling dies for precision thread rolling of fasteners/components. Mpt rolls are made from selected tools steel grade which is carefully machined & heattreated. Threading are ground after heat-treatment on world class precision thread grinders. Mpt thread rolls are made for max. Dia upto 300mm and width 250mm. The rolls are made in both types, in-feed(plunge feed) and annular thru-feed. Thru-feed rolls can also be supplied with angles of entry and release.

Machining Tools and Accessories
1) 45/90 offset external turning tool. 2) 62.5/72.5/75 straight external turning tool. 3) 45/75/90 indexable external turning tool. 4) 75/93 indexable facing tool. 5) Carbide products and accessories

Mini Multipurpose Machines
Mini multipurpose machines is made up of various parts, which can be assembled into different machines up to 10 functions. Such as lathe, woodturning lathe, jigsaw, milling machine, sanding machine, drilling machine, grinding machine, copying attachment woodturning lathe, etc. Various wood, plastic and aluminum (soft metal) are good materials for the machine.

Cnc Turning Lathe Machine
Capacity: 1. Max. swing dia (mm)500. 2. Max. machining length (mm) 600/ 850/ 1350/ 1860. 3. Max. machining Dia. (mm)500. 4. Max. swing over slide (mm)300. Spindle: 1. Type of nose: A8. 2. Inner taper of spindle nose 1:20. 3 .Max.bore dia.(mm)70. 4. Spindle speed (Stepless) (r/min). Low:23~230 Mid:68~680 High:220~2200. 5. Power of spindle motor (Kw) 7.5. Chuck: 1.Size(mm)254. Sleeve: 1.Dia. (mm) 75 ; 2.Travel (mm) 150 ; 3.Taper (MT) 5

40-Position Quick Change Tool Post and Tool Holder
1) Cam-lock handle rigidity locks and quickly release tool holder. 2) Cutting edge height is accurately and easily adjusted by special set screws. 3) Tools can be reground without removal from tool holder and setting remains unaltered. 4) 40 different angles (every 9 degree) are conveniently selected from position dials with marker. 5) Holders are interchangeable with other brands of 40-position tool post

Special Numbering Machine for Embossing
1) Wheel number: 6 - 16. 2) Backward or forward. 3) Character height: 3mm - 10mm. 4) Character pitch: 2.3mm - 6mm. 5) All kinds of types and styles available. 6) Impact thickness: < 0.2mm

CNC Engraver
1) XYZ axis resolution: 0.01 mm. 2) XYZ axis working size: 800 x 700 x 90mm. 3) Appearance size: 1,100 x 1,250 x 1,300mm. 4) Max material thickness: 130mm. 5) Consumption: 2,000W. 6) Spindle motor power: 1,500W. 7) Spindle rotation speed: 6,000-24,000rpm. 8) Blades holder: 3.175mm, 4mm, 6mm. 9) Working speed: 6,000mm/min. 10) Power supply: AC220±10% / 50Hz. 11) Compatible software: ARTCM, Type3, MASTERCAM. 12) Net weight: 260kg

Lathe Chucks
Supply all arrange of lathe chucks: 3 jaw self-centering scroll chucks from 50mm top to 630mm. 4 jaw self-centering lathe chucks from 80mm top to 500mm. 4 jaw independent chuck from 80mm top to 1400mm

Industrial Type Bench Drill
1) Max. drilling diameter: 12mm. 2) Model of spindle nose: B16. 3) Base size: 300 x 300mm. 4) Workable size: 250 x 250mm. 5) Distance, spindle nose to base surface: 220 - 500mm. 6) Distance, spindle axis to column surface: 195mm. 7) Max. spindle travel: 100mm. 8) Spindle speed: 480 - 4080/5. 9) Motor: 0.37kW

High Precision Boring Machine Of Electromotor Rotor
1) Workpiece: electromotor rotor. 2) Boring precision: Ra0.8-1.6, cylinder degree ≤0.005. 3) Adopting high precision boring tools of rotational location cutter. 4) Each processing. 5) Cycle times: 15 seconds of one part

Wire Drawing, Furnace and Nail, Screw Making Machine
We have all kinds of wire drawing machines (dry type and water type) in additional for all drawing wire industry: 1) Pulley type continuous wire drawing machine. 2) Straight line wire drawing machine. 3) Water type drawing machine. 4) Horizontal wire-drawing machine. 5) Vacuum resistance furnace for wire drawing. 6) Barbed wire netting machine. 7) Single wire drawing machine. 8) Horizontal auto winder. 9) High speed coil nail collator. 10) Nail washing machine. 11) Shucking machine. 12) Wheel heat treating winder. 13) Screw steel bar cold line

Horizontal Metal Band Sawing Machine
1) Max. process standard (mm): a) Round material: 280mm ; b) Square material: 220 x 300mm. 2) Process speed (m/min): 25 / 35 / 45 / 55 / 77m/min. 3) Saw band dimensions: 27 x 0.9 x 3,305mm. 4) Total power (kW): 2.645kW. 5) Working clamping method: hydraulic/manual. 6) Saw blade tensioning form: manual. 7) Machine dimensions: 1,800 x 1,150 x 1,400mm

Saw Blade Grinding Machine
The machine is designed for grinding and dressing diamond saw blades. The machine is equipped with three grinding wheels. Grinding two sides and front of saw blade without reversal. Side grinding wheels system with automatically swinging. Dust and abrasives falling through the cooling system.