|
 Heat
Exchangers
1) Materials: carbon steel, stainless steel. 2) Temperature and
pressure due to the used materials. 3) Applications: a) used in
oil field, medicine factory and refinery. b) Suitable for carbon
steel and low alloy steel heat exchanger and condenser in
petroleum chemical industries. Roll
Bond Evaporator
Our roll bond evaporator can used for various refrigerators,
freezers, show cases and water coolers. It can meet the
requirement of CFC and NON-CFC systematic properties with R134a,
R600a, and R400a.
Mixed
Refrigerant
1) Molecular weight: 97.6. 2) BP (°C): -46.4. 3) Critical
temperature (°C): 72.1. 4) Critical pressure (MPa): 3.74. 5)
Density of saturated liquid at 30°C (g/cm³): 1.045. 6) Specific
heat of liquid at 30°C [KJ/(kg.°C)]: 0.38. 7) Specific heat
of equipressure steam (Cp) at 30°C and under 101.3KPa
[KJ/(kg.°C)]: 0.21. 8) ODP: 0. 9) Vaporization heat under BP
(KJ/kg): 200.1 Heat
Exchanger
To make the refrigerator produce liquid vaporization and steam
liquefaction heat exchange through heat absorption and emission
in the refrigeration system. It is mainly applicable for
household air conditioner condenser, evaporator, commercial air
conditioner fan pipe, outdoor heat exchanger, non-standard heat
exchanger for automobile and shipping air conditioner.
Specifications: 1) Pipe diameter: Ø7mm, Ø9.52mm. 2) Length: 200
- 2,500mm. 3) Pressure resistance: 2.5MPa,with no leakage;
4.5MPa no deforming. 4) Leakage rate: ≤2g/a. 5) Residual:
solid impurities≤18mg/m2, oil
impurities≤37mg/m2, residual water≤55mg/m2.
6) Heat transfer performance (COP): >3.2 Ammonia
Compressors
Manufacturer and exporter of ammonia compressors, high speed
compressors, slow speed compressors, ammonia air handling unit,
ammonia condensing unit, ammonia valve fittings for industrial
refrigeration, cooling towers, industrial cooling plants from
Neer Enterprises, china. Plate
Heat Exchanger
We supply plate exchangers to heat and cool raw materials for
steam heating water and sugar, hot water heating juice and milk,
and other beverage processing applications. The plate material is
made of 304 or 316L (optional) stainless steel. The rubber seal
is made from EPDM or NBR rubber, and the operating pressure can
reach 1.0MPa. The partition can be corrugated to create a faster
flow for better heat transfer. The exchanger frame is also made
of stainless steel.
Bundy
Tube
Specifications: 1. Main use: widely used in evaporators,
refrigerators, air conditioners, automobiles and heaters. 2.
Features: high intensity, good plasticity, and small resistance.
3. Standard: ASTMA254-94. 4. Materials: materials can be altered
according to customers' requirements. 5. Outer diameter: Φ3.20mm-Φ10.00mm
(Φ1/8''-Φ1/2''). 6. Wall thickness: 0.5mm-0.71mm Seawater
Ice Maker
The seawater ice produced by this machine is mainly used in ocean
and offing fishing to refrigerate, keep fresh and pre-cool fishes
before deepfreeze. The high cooling speed can make the fish
temperature to -2 ~ 0 centigrade degrees rapidly, so to achieve
the best refrigeration temperature at the first time. This
machine has the advantage of small cubage, low noise, low
vibration, large output, energy saving, high automatic, and
smooth running..
Refeigerant
Compressor
Suitable for the ranges of high temperature, middle temperature
and low temperature, the products are widley used for air
conditioners, heat pumps, and refrigeration and
fresh-preservation for industrial and commercial usage. Copper
and Copper Alloy Tubes
1) Made of pure copper and brass of good quality. 2) Application:
higher temperature service, applicable to condenser for vessels,
heat and water supply, and chemical industry. 3) Standard and
material: a) ASME SB111: C68700, C71500. b) ASME SB280: C12200.
4) Specification range: a) OD: 7 - 325mm ; b) WT: 0.5 - 10mm. 6)
Elaborate designs available as per customers' requirements
Evaporative
Air Cooling System
evaporative air cooling system is designed to be the highest
quality and especially for efficient cooling with low
consumption. These BlitzTm evaporative air cooling system is in
many instances capable of simulating the cooler conditions so
often found at or near expanses of water. It makes it possible to
work effectively cool homes, factories, houses, offices and many
other areas and is substitute of mechanical refrigeration in
several applications. This type of Air Cooling system circulated
outside air through a specially designed media that cools and
cleans hot and dusty outside, air prior to feeding it into your
premises. Refrigeration
Compressor
Suitable for: Various refrigerator, freezer, dehumidifier,
ice-making machine, water-dispenser, medical cooling-make machine
etc. Features: Low in noise, high in efficiency, and saving in
energy, good in low-vol start-up, long in working-time. Each
capability index reach the international advanced standard Louvre
Condenser
Specifications: 1) Raw material: a) Rolling welded steel tube:
4.76 ~ 6.35 x 0.71. b) Low carbon steel wire: 1.4 ~ 1.6mm. c)
Bracket: steel plate SPCC thickness 0.6 ~ 2.0. d) Base mounting
plate: SPCC thickness 0.6 ~ 0.8. 2) Technical standards: can
produce according to clients' drawing or samples. 3) Performance:
a) Surface with electrophoresis coating to prevent the corrosion.
b) Inner cleanness can meet the requirement of R134a and CFC
cooling system. c) Can satisfy the cooling capability
requirements. Structure: 1) Flat type of wire on tube condenser
used at the back. 2) Bended or spiral type of wire on tube
condenser used at the bottom. 3) Wrapped type of tube embed on
plate. 4) Flat type of louvre condenser used at the back. R134a
cooling system tube inside standard: 1) Residual moisture:
≤20mg/m². 2) Residual dusty: ≤30mg/m². 3) Residual
mineral oil: ≤7mg/m². 4) Residual chlorine: ≤3mg/m².
5) Sealing density: ≥1.65MPa Refrigeration
Condensers
We are manufacturers of heat transfer coils for air-conditioning
and refrigeration equipments and machines. Viz chill water coils,
evaporators, condenser, steam coils, hot water coils. Plate
Heat Exchanger
Unit heat exchange area: 0.012m2. Maximum flux: 4m3/h. Material:
316L or 304 stainless steel. Weld material: copper or nickel with
a purity of 99.9%. Thickness of the sheet: 0.3mm. Liquid hold-up:
0.018L/each passage. Quantity of max. plate: 60. Design pressure:
1.0MPa or 3.0MPa. Testing pressure: 2.0MPa or 4.5MPa. Design
temperature: -195 ~+220°C. The way of linking the biggest screw
thread pipe of water: 3/4", the biggest welded. Pipe of
liquid: 7/8". Heat transferred: 1-5kW. Basic procedures: F1
-> F4, F3 -> F2. Area of application: hanging boilers,
water heaters, low temperature experiment equipment, and
small-sized refrigeration equipment. Air
Fin Cooler
1. Copper and Aluminum fin. 2. Computerized selection for
matching cooling capacity. 3. Energy saving mode. 4. To be used
with water and oil. 5. Safe for environment. 6. Wise selection of
cooling capcity Heat
Exchanger Air Processor
The ALH series product is the "heat exchanger air
processor". The venting of air conditioner and the new air
coming into the room should first enter into this equipment. The
venting air and new air do the heat exchanger. Use the energy of
venting to pretreat the new air. In summer and winter, the new
air can get the cooling and drying or warming and wetting
processing so as to do the energy cycling to ensure the
circulation of fresh air in the room and effectively recycle the
energy. Specialties: 1) The film of the filter is very small; you
almost cannot see the fiber constitution of the air hole that
reduces the circulating ratio of water-solubility gas, such as
ammonia and hydrogen. 2) The crossing airflow board is made of a
kind of environment protection board. Aluminium
Radiator
Aluminium Radiator: 1) Material: aluminum cast. 2) Testing
pressure: 1.8MPa. 3) High heat transmitting, environmentally
friendly, long service life and great safety. 4) Elegant and
attractive appearance Refrigeration
Gas R134a
We is a specialist blender and refiller of refrigerant gases in
India. We supplies to various countries R134a, R404a, R23, R123,
R141b in ISO tanks, tonners, disposable cylinders and disposable
cans kindly revert. Marine
Light Style Compressor Condensing Unit
Light weight and the whole weight is only about 1/3 ~ 1/4 of
normal product. Refrigerating capacity of single unit: 2.32kW ~
69kW. Refrigerant: R22, R134a, R404a, R407c. Safety protection:
high fluorine, low voltage, over temperature proof; adjusts
temperature, overload and lack of phases for compressor Corrosion
proof: condenser water side material is B10 Heat
Exchanger, Condenser and Evaporator
Place of Origin: China. Specifications: 1) Rated capacity:
2.8~67.7KW. 2) Volt: 220V/1/50Hz 380V/3/50Hz. 3) Pipe: 7mm,
9.52mm, 16mm. 4) Pressure: 2.5mpa leakage; 4.5mpa deformation New
Generation Of Evaporative Coolers
The new generation of evaporative coolers. Wide range ao
applications, large temperature drop. From inlet to outlet air
high efficiency. Low power condumption. Minimum maintenance.
Modular units from 3000-20000 c. F. M. Heat
Exchanger
Working principle: It is used for to heat air with steam or hot
water, or to cool air with salt water or chill water. It is
widely used for air conditioning system in mineral industry,
light industry, paper making, chemical, national defense,
textile, power, dairy, ceramic, hospital and theater. It is
constructed of spiral fin type tubes. Spiral type tubes have
different specifications for different types. The spiral fin air
heat exchanger is also named as heat radiator. It is the main
equipment of cooling device with chill media, or the heating
device for air heating. Refrigeration
Equipments, Heat Exchanger, Evaporaters
Major products: Spiral IQF, plate belt IQF tunnel, mesh belt IQF
tunnel, flake ice maker, contact freezers, blast freezer,
containerization block ice making machine, fresh/brine water
chiller packaged, r22/nh3 condensing unit, aircooler/unit cooler
for cold storage, refrigerating insulated panel, plate heat
exchanger, split refrigerating unit, tube ice making machine,
etc. Refrigeration
Compressor
The compressor is the same with refrigeration implement which
usually include refrigerator, refrigeration deepfreeze, kitchen
refrigeration, display case, revelation tank, dehumidify
appliance etc. The main feature: light compact, high efficiency,
good reliability, low noise vibration. Vertical
Condenser Unit
1) EI series can apply for all the middle and high temperature
cooling system. 2) Hermetic design. 3) Silencing technology. 4)
Safety and reliability. 5) High quality components. 6) Advanced
QA and testing process Heat
Exchanger Tube/Pipe
We can produce the products as follow: 1. Stainless steel
seamless tubes/pipes (form: straight lengths, U-bend and coils),
General usage pipe: Outside from 6 to 530mm, thickness from 0.5
to 38mm. Boiler & Heat-exchanger tubes: Outside from 3 to
60.3mm, thickness from 0.3 to 2.11mm. U-bend pipes: Outside from
15 to 38.1mm, thickness from 0.9 to 2.77mm Capillary pipes:
Outside from 0.3 to 4mm, thickness from 0.03 to 2.0mm (pipes can
be polished or bright anneal with customer's demand). Stainless
steel welded tubes/pipes: Outside from 10 to 1220mm, thickness
from 0.5 to 12mm. 2. Honed tubes/pipes: Outside from 30 to 700mm,
thickness from 3 to 100mm. Chrome plate rod/bar. Outside from 6
to 160mm. Hydraulic cylinder Evaporator,
Refrigerator
Cost effective design solution. Compatible with all new
refrigerants. Improved energy efficiency. Advanced corrosion
resistance. Excellent heat transfer characteristics. Fully filled
pressure n2 (if required). Max. Dimension: 2000mmx1000mmx200mm.
Od tube: 0. 1875" (4. 76mm). Wire: Bright basic low carbon
steel. 16 gauge (0. 0625") (1. 59mm). 17 gauge (0.
0540") (1. 37mm). 18 gauge (0. 0475") (1. 21mm).
Finish: Black epoxy power coating. Black e-coat. Configuration:
Standard: flat, wire-on-tube. Custome: folded, wave flow,
compact, rolled Flake
Ice Machine
Features: 1) Size: 150 x 55 x 55. 2) Flux: min. 90L/H. 3)
Electric current: max. 5.5A. 4) Pressure: 3 Bar. 5) Work voltage:
12V. 6) Used on Toyota automobiles Refrigerant
/ Freon
R134a: Purity: 99. 90% min. Moisture: 10ppm max. Chlorinated
Conpounds: None. Evaporation Residue: 100ppm max. Acidity: 1ppm
max. Non Condensables: 1. 5% max. Appearance: Clear, Colorless.
Odor: Ether (Slight). Purity: 99. 8% min. Moisture: 10mg / KG
max. Acidity (Counted as HCL) : 0. 1mg / KG max. High boiling
residue: 50mg / KG max. Non-condensable Gas in Vapor Phase: 1. 5%
max. R22: Appearance: Clear, Colorless. Odor: Ether (Slight).
Purity: 99. 8% min. Moisture: 10mg / KG max. Acidity (Counted as
HCL) : 0. 1mg / KG max. High boiling residue: 50mg / KG max.
R404A: Purity, PPm, % : 99. 8. Moisture, % < 0. 001. Acidity,
HCL, % : 0. 00001. Noncondensable gas in Vapor phase, % <: 0.
01. R407C: Moisture, PPm, % : 99. 8. Moisture, % <; 0. 001.
Acidity, HCL, % : 0. 00001. Noncondensable gas in Vapor phase, %
<: 0. 01. Packing: 11. 3kg / cylinder 1140cyinders / 20FCL.
R410A: Content: 99. 8% min. Appearance And Odor: Colorless
Liquidfied Gas. Moisture: 10 PPM max. Acidity: 0. 1ppm max. R12:
Boiling (bubble) point: -26. 23 F Percent volatile by volume:
100. Boiling (dew) point: -10. 05 F Mol. Wt: 89. 87. Density
(liquid 70 F) 70. 27 LB / FT3 Pressure: 95 PSIA @ 70 F. Vapor
Density (Air = 1) : @ 70F 1. 29 LB / FT3 Solubility in H2O:
Slight. PH Information: Neutral Freezing point: Not Established.
R502:Boiling Point: -45. 4oc (-49. 7o F). Vapor Pressure: 169
psia at 25 oC (77 o F). Vapor Density: 3. 92 at 25 oC (77 o F)
(Air= 1). % Volatiles: 100 WT%. Evaporation Rate: >1 (CCl4 =
1). Solubility in Water: 0. 15 WT% @ 25 oC (77 o F).
|
