Tapered Roller Bearings
1) Tapered roller bearings (single row and double row). 2) Inner diameter: 10 ~ 1,500mm. 3) Types: 30200, 30300, 31300, 32000, 32200, 32300, 32900, 33000, 33100, 33200 standard types.

Tapered Roller Bearing
1) Spherical roller (21000, 22000, 23000, 24000 and 29000 series).2) Tapered roller (30000 series and inch size). 3) Thrust bearings (50000 series). 4) Pillow block (UCP, UCF, UCFL). 5) Low-noise deep groove ball bearing (mostly 6000 series)

Cylindrical Roller Bearings
Cylindrical roller bearing can only be used to bear radial load and have high capacity of bearing radial load. It is widely used in power machinery, engineering machinery and automobile industry.

Rolling Mill Bearing
1) 2 lit table lamp. 2) G9 60W x 2 bulb. 3) Shade: glass. 4) Size: 240 x 500mm. 5) Switch: hand on / off switch in line

Self-Aligning Bearings
1) Self-aligning and insensitive to angular misalignments of the shaft relative to the housing. 2) Suitable for applications with considerable shaft deflections or misalignment are to be expected. 3) It has the lowest friction of all rolling bearings, which allows cooler running even at high speeds

Conveyor Roller Bearings
1) Outer ring is produced by pressed steel sheet with zinc plated. The inner
ring is produced by carbon steel with zinc plated or with black oxidized. 2) Bearing with excellent surface for conveyor rollers. 3) Bearing with long life performance

Cylindrical Roller Bearing
Single row cylindrical roller bearings, Double row cylindrical roller bearings, Four row cylindrical roller bearings, And all kinds of inch sizes roller bearings. Used in heavy electric motor, machine tool main shaft, axletree axle box, diesel engine crank shaft and the gear box, automobile, tractor, etc.

Taper Roller Bearing
The inner and outer ring raceways and rollers of these bearings are made with a taper so that the surface planes of the raceways and roller axis meet at a point. The rollers are guided by a flange on the inner ring. Tapered roller bearings are separable, and have the following components: outer ring, inner ring and roller assembly. The non-separable inner ring and roller assembly is called the 'cone', and the outer ring is called the 'cup'. Internal clearance is established during mounting by the axial position of the cone relative to the cup..

Bearing Rings
1) Dust-proof, water-resistant and high temperature endurance. 2) Competitive price. 3) Prompt delivery. 4) Small orders are acceptable. 5) Customer's drawings and samples are acceptable

Track Roller Bearing
1. The construction is the same as double-row angular contact ball bearing. The wall of outer ring is thick and round arc is R500mm. So it provides a heavy radial loading capacity.. 2. Fine impact resistance and wearing capacity.

Tapered Roller Bearing
1) Size: 17~360mm. 2) Series: 30200, 30300, 32200, 32300, 32000, 32900, Inch

Special Extruder Bearing
Multi-row tandem thrust roller bearing special for extruders of plastic and rubber. From 2 rows to 8 rows. Made in china.

Aligning Roller Bearing
1) With large bearing loading capability. 2) Widely used in metallurgy and mining machinery. 3) Main specification range: a) Inner diameter: 25 - 60mm ; b) Outer diameter: 52 - 150mm ; c) Width: 15 - 50mm

High Power Speed Reducer
TH, TB helical tooth/umbrella tooth-skewed tooth series high power speed reducer is brand-new rigid tooth flank gear unit with wide application areas, which has features of large torque range, a design of unit structure modulization capable of horizontal mounting and vertical mounting. It has solid shaft, hollow shaft and hollow shaft with shrink disk. With carbureted
high-strength good-quality alloy, this series has the features of high-efficiency and long life-span, high permissible axial and radial loads, low noise, high reliability and compact structure. Features: 1) Output speed: 1.7 - 1,200r/min ; 2) Output torque: up to 47,000N.m ; 3) Motor power: 2.2 - 5,366kW ; 4) Mounted form: horizontal mounting, vertical mounting, axis mounting, shrink disk mounting

Tapered Roller Bearings
Sizes and sphere of our production: 1) Single row ; 2) Single row, paired face-to-face ; 3) Single row, paired back-to-back ; 4) Single row, with solid oil ; 5) Double-row, TDO configuration ; 6) Double-row, TDI configuration. 2,000 bearing combinations with sizes ranging from a 0.3125" (8mm) bore to an 25.4" (508mm) outside diameter. We offer the most extensive line of tapered roller bearings available anywhere in the world. Series: Metric series, inch series, ISO series, non-standard series and Timken, FAG, SKF, NTN, NSK and KOYO. In a word, we can produce any type tapered roller bearing from 10mm I.D to 450mm.

Slewing Bearings
1) four-point contact ball slewing bearing (no gear, outside gear, inside gear) , 2) double row balls slewing bearing, 3) crossed cylindrical roller slewing bearing (no gear, outside gear, inside gear). 4) Three-row cylindrical roller slewing.

Spherical Roller Thrust Bearings
The outer ring raceway of this bearing is spherical, with the center of the radius located on the bearing axis, providing a self-alignment capability. This bearing incorporates a 45^o contact angle that enables the bearing to support large axial loads and moderate radial loads. These bearings incorporate an improved internal design that allows relatively high-speed operation.　

Banded Thrust Roller Bearings
1) Full complement of rollers or balls; 2) Unground or ground choice; 3) Banded; 4) Part numbers: T88W, T101, T163W, T251, T302W; 5) Can custom-made as per samples

Transmission Parts
All kinds of transmission parts, i.e. standard sprockets, taper lock sprockets, special sprockets, chain couplings, shafts, gears, pulleys, taper bushes, racks etc.

Punched Ring Roller Bearing
1) A full range of series from SCE44 to SCE3220. 2) Has enough intensity and resistance to wear. 3) Nylon retainer's highest revolution temperature: 120°C. 4) Short-term revolution temperature: 180°C. 5) Material: good quality steel plate or as per your requirement

Pullrods System
1) We can produce the punched parts in different specifications. 2) My factory usually produce the items according to client' samples or drawings. 3) Attended punched/pressing ports used in auto clutch. 4) At present, we have developed other parts, that work in furniture, building machines, yachts and engines garage door parts. 5) All kinds of surface treatments are available: polished, zinc plated, nicked plated, chrome plating powder coating, e-coating, dip coating, phosphate coating