|
 Indium
Ingot
Indium ingot 99.995% (pure indium): We are producing the indium
in China, the annual capacity of indium ingot 99.995% is
20,000kg. Specification: not less than 99.995% Aluminum
Ingot
We produce high purity metal. Alloy: P 0610 or better in 1500 lbs
remelt Ingots, along with other. Alloy: A356. 2 in 30 lbs and T
ingot. Aluminum Association Alloy 365. 1.
Silver
Ingot
1) IC-Ag99.99 standard silver. 2) Product standard:
GB/T4135-2002. 3) Weight: 15&±1kg per bar. 4) Trait: high
purity, good surface Casting
Aluminum Alloy Ingot
Alloy: 101, 102, 104, 105, 111, 107, 108, 109, A356, A383, AC213,
AC8A, ADC12. We can supply GB/T-8733-2000 series of casting alloy
ingots according to the customer's demands.
Magnesium
Ingot
1) Label: gross weight, net weight and content and others. 2)
Marking: single with a factory material data. 3) Single weight:
7-8 kilograms. 4) Use: magnesium is light metal, used for space
flight, aviation, aluminum metal alloy, car manufacturing, steel
take-off sulphur and metals restores realm. 5) Consumption in
90's 20 centuries increases 4.5%. 6) Used extensively now for
automotive, communication, electronics hull, usage in these areas
increases 15.6% in the past decade. 7) Usage for steel take-off
sulphur increases 6.46% IC
Grade Ingot Spec
IC Grade Ingot Spec (Silicon Single Crystal): Diameter 100±0.3
mm ; Resistivity 2.5------7.5 Ohm-Cm ; Radial Gradients 9% Max ;
Dopant N/Phosphorus Orientation <100> ; Misorientation ±1
Degree Max ; Primary Flat (011) ; Length 32.5±2.5mm ; Secondary
Flat 180 Degree From Primary Flat ; Length 18.0±2.0mm ;
Dislocation Density < 100/Cm2 ; Osif Density < 500/Cm2 ;
Chip Free ; Contamination Of ; Craters Free ; Residual Work
Damage Free ; Scratch Free ; Oxygen Content 24----36 PPM.
Packing: Silicon single crystal rod is sealed in a plastic film
bag, then put into the polystyrol foam box which is soft and
springy, finally put the box into the cardboard case. Magnesium
Ingot, Alloy, Powder
We are lead exporter of metal products, we can supply following:
Magnesium metal: 1)magnesium
ingot(size:7.5kgs;500g;300g;200g;100g). 2)magnesium scrap
(butt-end). 3)magnesium powder. 4)magnesium
alloy(az91/am60/am50). 5)magnesium plate. Silicon metal: Grade:
553;441;331;3305;3303;2202. Calcium silicon: Spec.: Ca31si60 ;
Ca30si60 ; Ca28si60 ; Ca26si60 Tin
Ingot 99. 75% And 99. 95%
We are trading company in non ferrous metals in Viet Nam. At
present, we can supply tin ingots, details as follow: A. Tin
Ingots with pure tin 99. 75% min. Chemical compositions: Sn: 99.
75% ; Bi: 0. 083% ; Pb: 0. 023% ; Fe: 0. 022% ; As: 0. 085%
; Cu: 0. 017% ; Sb: 0. 011%. B. Tin Ingots with pure tin 99. 95%
min.
4N
Indium Ingot
We can supply 4N indium ingot, 5N indium ingot, cerium oxide
nanometer, indium oxide, praseodymium oxide and terbium oxide. Silicon
Ingots
High quality silicon ingots. 3",4",5",6" and
8" inch high quality ingots For solar and semicondor use. Tin
Based Bearing Alloy Ingot
Properties: lubricant film retention, and good wear resistance.
Usage: manufacturing different kinds of bearings and bearing
seals. Made in china.
Ingots
We are able to supply you with Zinc Ingots, Aluminum Ingots,
Magnesium Ingots and Nickel Ingots Russian origin. Indium
Ingot
Indium ingot quality guide line according to GB6607-86. In%:
99.991% ; Cu: 0.0005 ; Pb: 0.001 ; Zn: 0.0015 ; Cd: 0.0015 ; Fe:
0.0008 ; Ti: 0.004 ; Sn: 0.0015 ; As: 0.0005 ; AI: 0.0007 ;
Weight: 500g/ingot Ductile
Cast-iron Ingot
Product certification: Ductile cast-iron ingot. C:3.9-4.2%, SI:1%
max, mn:0.3% max, p:0.06% max, S:0.015% max, Cr:0.08% max,
cu:0.08% max, sn:0.04% max, fe: Balance% Magnesium
Ingot
1) calcium silicon: Ca:28%min; SI:55-65%min ; Size: According to
client's requirement. 2) siicon metal:
5/5/3,4/4/1,3/3/1,3/3/03/2/2/03/3) cadmium ingot ; CD:99.99%min
99.995%min. 4) electrolytric manganese metal: Mn:99.7%min. 5)
magnesium ingot: Mg:99.9% or 99.95%min ; Ingot
weight:7.5kg+/-0.5kg,1kg,300g,100g ; Magnesium butt-end ;
Size:1-2kg ; Mg alloy. Magnesium powder ; Mg:99.8%min ;
Size:0-80mesh, or accoding to client's requirement. 6) Manganese
metal mn:97%min ; Indium ingot in:99.99% ; Bismuth ingot
bi:99.99%. Aluminium
Ingot 99. 97%
Material: Aluminium LME Ingots 99. 97%. We can offer Aluminium
Ingots with purity 99. 97% from our supplier in China. Lead
Ingot Zinc Ingot
We are very strong supplier of Lead ingot% 99. 986 and zinc
ingot% 99. 95 in Iran. stainless
Steel Ingot
Specifications: 1) Sizes: 10.5, 12, 14, 17, 18 , 20, 22, 24, 26,
30. 2) Materials: 301, 304, 304L, 310, 310S, 316, 316L, 317L,
321, 347 Antimony
Ingot
Properties: antimony is one kind of nonferrous metal, silvery
white solid with polish and crisp character. There are two
allotropes, yellow anamorphosis is stable under 90 centigrade.
Stability form of antimony is metal anamorphosis. Density 62g /
cm3, with badness character in heating.
Application: as alloy hardener to be used in metallurgy,
accumulator, and war industry and so on, it is also the raw
material of oxygen antimony. Brass
Ingots
We produce: 1) brass ingots: Cu 59-60% ; Al 0,3-0,6 max ; Sn max
0,8 ; Lead 1,5 -2,5 max ; Fe max o,6 max. 2)also we produce
bronze ingots as follow:: Cu 84-85% ; Sn 5-6% ; Fe 0,3 max ; Al
0,001 max ; Zn 4-6 % Indium
Ingot
Our company can supply indium ingot, bismuth, lead-free, ito
powder, indium oxide, and so on. Commodity: indium ingot. Spec:
99. 995% Yellow
Brass Ingots
Yellow Brass Ingots, 4 to six containers. This is the Yellow
Brass: Cu 66.77 ; Sn 1.0 ; Pb 1.27 ; Zn 29.55 ; Fe .90. Made in
china. Mono
Silicon Ingot
General Characteristics: Diameter 152. 0 + / -1mm ; Crystal
Growth Method CZ ; Crystallinity Mono ; Crystal Orientation
<100> + / -3 degree ; Conductivity Type P ; Purity-min 6N
or 7N ; Dopant Boron ; Resistivity 0. 5 ~ 3, 3~6ohm-cm ;
Lifetime-min 10 microsecond ; Oxygen Concerntration < 1. 0 x
E18 at / cm3 ; Carbon Concerntration < 1. 0 x E16 at / cm3 ;
Appearance None of fracture, cracks, Glue Residual &
Contamination ; Origin Japan. Ingot
We offer INGOT. Purity: 99, 9999%. Carbon content <11 ppm.
Oxygen content <10ppm. Life time: 2-8 micro seconds.
Resistivity: >= 0. 5 ohm / cm Aluminum
Alloy Ingot
Specifications: 1) Type: ADC12 ; 2) Length: 64cm ; 3) Width: 10cm
; 4) Thickness: 5.5 - 5.8cm ; 5) Average weight: 7kg/item ; 6)
Aluminum alloy ingredient: Cu 1.5-3.5, Si 9.6-12, Mg 0.3 max. Fe
0.9 max.; Zn 1.0 max. Mn 0.5 max.; Ni 0.5 max., Sn 0.2 max., Al
remained ; 7) Characteristic: good pull-resistant intension,
excellent capability in casting, adaptable to process of all
products. 8) Usage: widely used in all kinds of aluminum alloy
castings Magnesium
Ingot
Our company supply magnesium metals the following: 1. Magnesium
ingot. Purity:99.9% min/99.95% min. Ingot
weight:7.5kgs/300g/200g/14kgs etc. 2. Magnesium alloy:
Az91hp/az63/az10/am60/am50/am20 eta. Ingot weight:7.5kgs/5kgs. 3.
Magnesium powder Both
Primary/Secondary Aluminium Ingot
We are one of the leading suppliers of both primary and secondary
aluminium and its alloy ingot, billet, slab, sow, e. C. Grade
wire rod, mechanical wire rod/wire, extruded profiles, round bar,
square bar, hollow round/square, shape sections, Including all
rolled products such as aluminium mold plate, heavy plate,
aluminium block, sheet, strip, sheet in coil, foil stock, circle,
coated circle sheet. Indium
Ingot 99.99%
Specifications: we'd like to tell you Our company deal in indium
series such as indium ingot 99.99%, indium foil, indium wire,
indium powder and indium balls. The quality are high standard and
the price is reasonable.
|
