|
 Zinc
WE HAVE ZINC AND SILVER CONCENTRATES IN BULK FOR SELL, APROX. 52%
PURE, WE PUT ONE LOT OF APROX. 500 MTONS IN ARICA FOR LOAD. Pyrite
Ore
Spec:(S:35%~52%; Fe:>42%; As:<0.1%; SiO2: <3%;
Zn:<0.1%; Pb: <0.1%; Cu:<0.05%; H2O:<0.5%;) size
0.1-100mm 250mesh 325mesh.
Black-Plated
ERW Steel Pipes
1) Standard: ASTM, JIS, BS, GB. 2) Grade: Q235, Q215, Q195,
Q235B. 3) Round section diameter: 19 - 340mm. 4) Wall thickness:
0.8 - 13mm. 5) Plain or beveled ends Iron
Ore
1) Fe 62% (rejection below: 61%). 2) SiO2 <5, 70% max. 3)
Al2O3 <1, 75% max. 4) P <0,027% max. 5) S <0,017% max.
6) Moisture: 6.00% max. (free moisture at 105°C)
Mycotoxin
Binder
Zearalenone and Ocratoxin, and eliminates these toxins with
feces, reducing their toxicity and increasing the nutrients
absorption. ZENIFIX is a fine, inert, chalk-white powder with
free-flowing properties, which helps mixing and pelletization
processes. HOW ZENIFIX WORKS? The binding effect of ZENIFIX
occurs in the animal's intestine where it is activated when in
contact with gastric juice; it binds to toxin molecules, forming
an indissoluble and highly stable complex. This complex cannot be
assimilated by the body as it cannot pass through the intestine
walls and it is eliminated with feces. Bauxite
Geology type: Bauxite formed by tropical weathering. Mineral
type: Massive, clayey and sandy bauxite mineralization. Reserve
base: 300Mt in current reserve area. Mining method: Open
pit. Processing method: Crushing and drying run-of-mine ore for
shipmen. Reserve base: 300Mt in current reserve area. Mining
method: Open pit. Processing method: Crushing and drying
run-of-mine ore for shipment. Bauxite deposits are found across
much of western and central Guinea, having been formed by the
tropical weathering of underlying, aluminium-rich rocks. The
deposits are typically close to the surface. Proven reserves
total some 2, 300Mt with additional probable reserves of 18,
600Mt, most of which contains between 40% and 50% aluminium oxide
(Al2O3) Brown
Fused Alumina / Barium Silicon / Calcium Silicon
We are the manufacturer and supplier for the mineral and metals.
Metals: 1. Zinc ingot. 2. Ferro Phosphate. 3. Silicon metal. 4.
Electrolytic Manganese. 5. Ferro Silicon. 6. Manganese Silicon.
7. Barium Silicon. 8. Synthetic industrial Diamond. 9. Brown
Fused ALUMINA. 10. Silicon Carbide. 11. Antimony ingot. 12. Tin
ingot. Minerals: 1. Phosphate rock. 2. Phosphate Powder. 3.
Barite lump (Powder). 4. China clay. 5. Clnnabar. 6. Realgar Iron
(Fe) Ore 65%
Iron (Fe) Total 64. 81%. Iron Trioxide (Fe2O2) 92. 67%. Aluminium
Trioxide (Al2O3) 0. 86%. Calcium Oxide (CaO) 1. 52%. Magnesium
Oxide (MgO) 0. 09%. Manganese Dioxide (MnO2) 0. 41%. Chromium
Trioxide (Cr2O2) 0. 10%. Sodium Oxide (Na2O) Less than 0. 01%.
Potassium Dioxide (K2O) 0. 45%. Silicon Dioxide (SiO2) % 3. 43%.
Titanium Dioxide (TiO2) 0. 27%. Loss On Ignition (LOI) Less than
0. 01%.
Silicon
Metal
1) Si-1: Si99.5% min., Fe: 0.3% max., Al: 0.1% max., Ca: 0.1%
max. 2) Si-2: Si99.4% min., Fe: 0.4% max., Al: 0.1% max., Ca:
0.1% max. 3) Si-3: Si99.3% min., Fe: 0.3% max., Al: 0.3% max.,
Ca: 0.1% max. Nickel-Chrome
Pig Iron
New products for stainless steel making, Ni-CR pig iron can
instead of Ni & Cr. Use this products can reduce cost around
USD390 for one ton steel. Caustic
Calcined Magnesite
The caustic calcine is a kind of material which is used to
further burn high purity magnesite, middle grade magnesite and
taking various percales as the raw materials.
Nickel
Ore 1. 2% -1. 4%
We operate a mine with a capacity of 50, 000 tons of 1. 2% -1. 4%
nickel laterite ore. We still have 20, 000 tons of uncommitted
production starting. We are looking to receive offers for our
uncommitted ore production. Ti,
Ta, Nb Tube
Application: widely used in seawater breed aquatics, nuclear
power, petrochemical industries, avigation, mechanical
manufacturing, etc. Dead
Burned Magnesite
Dead burned magnesite (dbm): 1. Mgo:97.7%min. Sio2:0.5%max.
Cao:1.2%max. Fe2o3:0.5%max. L. O. I.:0.3%max. B. D:3.30(g/cm3).
2. Mgo:97.5%min. Sio2:0.5%max. Cao:1.2%max. Fe2o3:0.7%max. L. O.
I.:0.3%max. B. D:3.30(g/cm3). 3. Mgo:97%min. Sio2:0.7%max.
Cao:1.4%max. Fe2o3:0.8%max. L. O. I.:0.3%max. B. D:3.30 (g/cm3).
4. Mgo:96%min. Sio2:1.0%max. Cao:1.5%max. Fe2o3:0.8%max. L. O.
I.:0.3%max. B. D:3.25 (g/cm3). Size:0-10mm or 200,325mesh Iron
Ore Fines
We hv ready cargoes of iron ore fines as: 1. 58% fe rej, 40000mt
at managlore f. O. B 47 usdpmt. 2. 58% fe rej maina jetty goa, f.
Ob 40000 mt rs. 1775 pmt. 3. 52% fe 40000 mt goa f. O. B 25
usdpmt. Includes govt duty. Chromium
& Nickel
We have a mining factory in Philippines which is engaged in
producing chromium and nickel. There are three kinds of the Ni
ore as follows: 1. Ni 0.9-1.1%, Fe more than 42%. 2. Ni 1.4-1.8%,
Fe 25-30%. 3. Ni 1.9-2.3%, Fe 10-18% Antimony
Ore
We need partners to cooperate to exploit our 200 km2 ore area in
Cambodia including antimony, nickel, copper. We have been
exploiting the antimony ore (over 62% ) and get 10 MT of antimony
but not yet for the nickel ore. Iron
Ore
Specifications : Chemical Composition ( Percentage by weight
basis). Fe: 63% (Rejection 62%). Al2O3: 3.5% max ( Rejection
above 4.5%). SiO2: 3.5% (Rejection above 4.5%). TiO2: 0.72%.
PHOSPORUS: 0.06% max. SULPHUR: 0.05% max. CaO: 2.4%. MgO2: 0.73%.
MnO2: 0.19%. SIZE : 10 mm 90% Min. Plus 10 mm 10% max. Minus 0.15
mm : 30% Max Tungsten
Based Heavy Metals
produce different kinds of tungsten based heavy metals. Tungsten
based heavy metals has high density, high tensile strength, high
elastic modulus, low thermal expansion coefficient, good
absorbtion of radiation, good thermal and electrical
conductivity, high electrical resistivity, good mechanical
processing characteristics. Gesac produce various kinds of high
density tungsten alloy such as rods, balls and other accessories,
which are major used for bellow area: Aerospace, medical and
chemical industry, electric industry, balancing weight. Copper
We can make 120MT high purity copper (99.9999% min.) annually. It
is used in the hi-sensitive audio, biologic medicine and
sputtering targets maker. Manganese
Ore 46% & 39%
Manganese ore grade 46 % for Sale. Commodity manganese ore.
Quality mn ( grade 46 % ).. A/mno2 = 75.8%. B/fe2o3 = 9.2%.
C/sio2 = 5.9%. D/al2o3 = 7.6% Copper
Ore
Material: copper ore. Origin: nigeria. Quality: 30% -44% copper
content in the ore. Size: 0 to 50mm Nickle
Oxide
It used for glass industry, ceramics, glaze, coloration,
electronics, battery and war industries. Expanded
Metal Meshes
Expanded Metal Meshes: Material: Steel Plate, Stainless Steel
Plate, Brass Plate, Aluminum Plate, Titanium Plate, Nickel Plate,
ect. Spec: In all sizes, thickness, any style, available for
quickly delivery. Customer orders available. Application: Mainly
used in filtering, Medical, Paper-making, breeding, battery,
protection craftwork, audio facility Crushed
Iron Ore Or C-Ore Of Grade 59-62%
We are the exporter of iron ore fines .We have our own crusher at
Bheemasamudra near Chitradurga district. The details are
furnished as below, Crushed C-ore: Fe 59% -62% grade, Size 05-20
mm, Tumbler 76-80, Silica 4% (maximum) Copper
Ore
We are END-SELLER for: 1. Beryllium Ore. 2. Copper Ore. 3. Lead
Ore. 4. Manganese Ore. 6. Rutile / Titanium Ore. 7. Zinc Ore. We
also have SELLER SOURCE to 8. Crude OIL. 9. Petroleum Products Zircon
Sand
we want to sell metal mineral sand as bellows: - Content: Fe-47%
, Tio-10% , ZrO2-20% , SiO2-18% Chrome
Ore, Chromite
1. description of goods: Chrome Ore lump. 2. country of Origin:
Pakistan. 3. specification: Chrome Ore lump. Chemical Composition
(On Dry Basis) : Cr2O3: 40% Basis (Rejection at lower than 34% ).
Al2O3: 18% Maximum. MgO: 22% Maximum. SiO2: 20% Maximum. Cr / Fe:
2. 4 / 1 BASIS. Phosphorus: 0. 01% Maximum. Sulphur: 0. 02%
Maximum. Moisture: 5% Maximum. Size: 10-300mm, 70% Minimum and
0-10mm, 30% Maximum
|
