|
 Tungsten
Pin
Specifications: 1) Dia. 0.95 x 5.0mm. 2) Dia. 0.80 x 3.25mm. 3)
Dia. 0.75 x 5.0mm. 4) Dia. 0.50 x 3.1mm. Applications: 1) Making
electrode of flash lamp in camera ; 2) Making electrode of sodium
lamps ; 3) Making electrode of halogen lamps, metal halide lamps Spot
Welded Parts
1) Made by spot welding. 2) The component parts are made of thick
sheet metal with various surface. treatments in compliance with
customers' requirements. 3) OEM automobile metal stamped parts.
Cold
Forged Wing Nuts
1) Standards: DIN 315 (American form), ANSI B18.17 Type A (light
or heavy series), and UNI 5448. 2) Materials: steel, stainless
steel (A2, A4), and brass. 3) Surface treatment: plain, blue or
yellow zinc plated, nickel plated, dipping. 4) Finished for brass
and stainless steel products Aluminum
Sheet Material
1) High hardness, durable and high intensity. 2) Good plasticity
and changing property, easy to process. 3) So fine clean degree
after surface processing that own top quality. 4) The products
can be wildly used to produce kitchen appliance. 5) It is also a
new environmentally friendly material
Steel
Grating
1. Steel product standard: CHINA YB/700-88. 2. Standard:
manufacture from guest's necessity. Fox example: 1) Bearing bar
pitches may be 12.5, 15 to 30, 40, 60, 80 and 90mm, of which 30
and 40mm are recommended. 2) Cross bar pitch may be 30, 38, 50,
76 and 100mm, of which 50 and 100mm are recommended. 3.
Advantages of steel gird plank: light weight, strong intensity,
big load capacity, transmission and aeration, antiskid and
secure, wear well, non-dropsy, non-dirt, and easy to install. 4.
Hot galvanizing standard: CHINA GB/T13912-92. 5. Wrapping:
Wrapping is requested by the guest. Or it depends on being likely
being likely to wrap wrapping the method before Metal
Processing Service
We can supply a wide scope of sheet metal processing service such
as sheering, folding, punching, cutting, stamping and forming. Bracket
1) We can design and manufacture the products what you need. 2)
Materials: kinds of metal materials, aluminium, copper, brass,
carbon steel, stainless steel and other materials as clients
desire. 3) Surface treatment: zinc plating, nickel plating,
brushing, plastic plating and other special treatment according
to customers' requirements Metal
Stamping Products
1) With thickness from 0.1-0.4mm. 2) High precision. 3) Digital
camera contact and cell phone contact. 4) Mainly applied in
battery contacts, locks, machinery, home appliances and
electronic products. 5) The products range is continuously being
broadened. 6) We make every endeavor to develop towards high
precision and highly sophisticated to satisfy customers'
requirements.
Anchors
1) Products: a) Danforth style anchor, size: 16lbs - 153lbs. b)
Plow style anchor, size: 27lbs - 83lbs. c) Bruce style anchor,
size: 1kg - 25kg. d) Folding grapnel anchor, size: 0.75kg - 10kg.
e) Anchor swivel, anchor swivel multi-directional. 2) Material;
carbon steel, alloy casting, stainless steel. 3) Surface
treatment: polished, galvanized Electrical
Heating Wire
These alloy wires posses high electric resistance, corrosion
resistance, higher strength under temperature, good formability
and weldability. It can be used for making heating element and
resistor in metallurgical industry, household electrical
appliance and machine building industry. Flange,
Casting, Pipe Fitting
Specifications: 1) Blind/plate type: DN15-1000. 2) Thread type:
DN15-400. 3) Welding-neck type: DN15-400. We can supply all kinds
of flanges according to BS, DIN, ANSI, JIS and AS standards.
Pivot
Pin, insert and pivot that we supply are widely used in auto,
farm machine, engineering machinery, sewing machine, and textile
mechanism. The rate of defective goods is lower than 50ppm.
Material: 1045, 1020, 1010, 1018, 1215 (free cutting steel),
40Mn, 1141, copper, aluminum alloy. Processing and operation:
sawing, heat treatment, numerical control machining, drilling,
honing, grinding, machining center, gray phosphate Mid-Width
Hot Rolled Steel Baby Coil
Whether clients require steel strips for heat treatment, deep
drawing, case hardening, fine blanking or general stamping, we
can provide a range of solutions to meet their needs. Our company
can supply medium carbon, high carbon and a range of alloy grades
suitable for hardened, pre-hardened or tempered spring, washers,
hand tools and high-quality automotive components. Our range of
low carbon materials include materials for deep drawing, bending
and blanking with a range of tempers and guaranteed mechanical
precision to comply with universal quality standards.
Specifications: 1) Steel grades: Q195 - Q235 (equal to SS400/
E235B/ CT3CP/ S235JRG1/ 1020). 2) Standard: GB700-88,
GB/T1591-1994. 3) Thickness: 1.5 - 6.0mm. 4) Thickness tolerance:
≤2mm, +/-0.18mm; >2mm,+/-0.2mm. 5) Width: 245 - 520mm.
6) Width tolerance: +3/-2mm. 7) Coil Weight: 1.7 - 3.5MT. 8)
Uses: making pipes, cold strip-welded pipes, cold-bending
shaped-steel, bicycle structures, small-sized press-pieces and
house hold decoration goods Stamping,
Painting and Stamping Mould
1) Includes: a) Main panel: used in range hood ; b) Deep stamping
parts and lampshade ; c) Metal housing ; d) Electricity fitting
box ; e) Inner canopy: used in range hood ; f) Stamping mould. 2)
Material: various metal materials with various surface treatments
according to customers' requirements Aluminum
Window Frame
Our company can supply you various aluminum window frames and
profiles to you as per your requests. We are equipped with
advanced equipments for die fabricating, billet casting,
extrusion, varied surface finishing (anodizing, electrophoresis,
spray coating, fluorocarbon coating, wood grained) and further
mechanical processing.. Stamped
Parts
1) Precision stamped parts with ferrous and non-ferrous alloys,
and have extensive plating and metal-finishing coupled with an
ability to produce high-quality parts. 2) High production rate,
with competitive price. 3) Excellent dimensional accuracy. 4) We
can provide fabrication, deep drawing, machining, welding and
assembly. 5) All kinds of surface treatments are available:
polishing, zinc, nickel, chrome plating; powder, dip, phosphate,e-coating Border
Turning Parts
The products are widely used in mines, electric machines,
equipments, ships, railways, oil exploitation, electric
appliances, motor fittings, hardware tools, building
construction, engineering mechanics. Pressing
Parts
We can supply all kinds of pressing parts, machine parts, nails
and bigger cap nails. We can make it as per customers' demands,
and welcome your enquires. Automotive
Parts
1) Material: steel. 2) Machining equipment: CNC milling center.
3) Precision tolerance: 0.005mm - 0.01mm. 4) Advanced
workmanship, fitting tool, fixture, cutting tool Industrial
Profiles
1) Aluminum extrusion can be processed into different dimensions
and shapes based on customers' specifications. 2) High precision.
3) Various alloy chemical composition and alloy mechanical
properties, such as 6061-T6. 4) Available finish: anodized
(natural) or mill finish Metal
Processing Service
1) Materials: carbon steel, stainless steel, aluminum, brass. 2)
High precision metal stamping. 3) Press from 5MT to 400MT. 4)
Plate thickness: from 0.5mm to 10mm. 5) With different finish
treatment Aluminum,
Steel and Brass Parts
1) Material: stainless steel, Al 6061, 59-1Cu. 2) Process: CNC
machining. 3) Surface: clear anodes, plating, polishing. 4)
Packing: PV bag or bubble bag+ carton Tinplate
Strip
1) Thickness: 0.16 - 0.4mm. 2) Width: 180 - 580mm. 3) Steel
grade: Q195, Q195L, 08AL, SPHC, SPCC. 4) Hardness: T2.5 - T4. 5)
Tin coating mass: 2.8 / 2.8sqm. 6) Surface: as bright as mirror.
7) Standard: according to JISG3141. 8) Widely used in cans,
drums, barrels, home appliances, packages and vehicle fittings 75
Steel Products
T-shape baked varnish light steel keel series: adopting the
high-grade quality hot-dipped galvanized steel band and color
coat band (cold rolled through the bend equipment, and formed
after the pressing by the pressing machine) Metal
Processing Service
We own all of the metal processing machineries ,such as CNC Lathe
,CNC Center ,Milling machine ,grinding machine ,internal milling
machine, periperal milling machine ,heat treatment project etc.
We can processing all of the precision components you required Aluminium
Extrusion
Material:AA6063, AA6061, AA6060. Heat Temper:T5, T6. Thickness:
>=0.8mm. Surface treatment: Mill Finish, Anodized, Powder
Coated Metal
Cut Product
Material: carbon steel, stainless steel and other metal material.
Application: Truck and auto parts, hardware, mechined part etc.
Ability of procession: Stainless steel: 0.1-12mm. Carbon steel:
o.1-18mm. Our company can supply all kinds of laser procession
service, and is high precise/quanlity by laser. Flanges
1) Including plate flanges, threaded flanges, slip-on flanges,
lap joint flanges, and blind flanges. 2) Non-standard flanges are
welcome with technical drawings or samples. 3) Material in carbon
steel and stainless steel
|
