Non-Slip Metal Product
The non-slip products have these merits such as safer, serrated surface, maintenance free open design, high load capacity, long life, and fast installation.

Mica
Phlogopite mica: 1) Mica flake: a) Size: 0.5 - 20mm ; b) Impurity: <1% ; c) Moisture: <1%. 2) Mica powder: a) Size: 20 mesh, 100 mesh, 325 mesh ; b) Impurity: <1% ; c) Moisture: <0.5% ; d) Get pass rate: >95%. 3) Wet ground powder: a) Size: 100 mesh, 325 mesh ; b) Impurity: <1% ; c) Moisture: < 0.5% ; d) Get pass rate: >95%.

Looped Tie Wire
We can supply the different size of Looped Tie Wire and Wire ties. Galvanized, Black Annealed and Plastic Coated.

Fluorspar
Specification: CaF2 97 Min ; Density:3.18g/cm3 ; SiO2 1 Max ; CaCO3 1 Max ; Colour: White ; S 0.02 Max ; Melting Point:1270 ; P 0.02 Max

Color Strip Decorations
1) Can be widely used in family, party, celebration occasion, Christmas decorations, wedding ceremony. 2) With its novel design and fashionable characters, the color strip can be hung by silk thread to whirl and shine with wind, its colorful flap will add festival and joyful mood for your living

Interior Aluminum Compound Panel
Materials: 1) Front side: aluminum roll coated with PVDF or polyester. 2) Core: fire-resistant polyethylene or normal polyethylene (PE). 3) Rear side: aluminum coated with polyester. Features: 1) Super peeling strength. 2) Excellent surface flatness and smoothness. 3) Superior weather, corrosion and pollutant resistance. 4) Even coating, various colors. 5) Fireproof, excellent heat and sound insulation. 6) Superior impact resistance. 7) Lightweight and easy to process. 8) Easy to maintain

Mineral Fiber
Have good dispersion, suitable for all types of mixer mixing. You are using artificial fiber production of brake linings rockwool products. Mills cotton particles without cutting, uniform product appearance, good texture. In the production process are equipped with special equipment to separate the slag slag separated slag Content low: " 3, the system said brake linings, brake noise ratio. The recommended dosage: Drum lining used vans: 15% -35%. Disc brake pads: 8-25%. Recommend mixing process. 

Plugging
Plugging agent is the nature of natural plant polymer composite material with good water swelling kinetic energy bridge closure, strong adhesion, with the traditional LWD plugging agent, the size without "matching" restriction applies to all the mud system, can be used to plug the leaking, but also the protection of low voltage output layer (oil, gas, water, etc.) . Properties: Appearance: The white powder fineness: 40 water projects: <14% PH: 7-9.

Great Battery Raw Materials
We can provide raw materials as follows: 1) Zinc cake/can ; 2) Coated paper ; 3) Paper coin ; 4) Carbon bar ; 5) Bitumen (tar) ; 6) Rosin ; 7) Plastic/rubber cap ; 8) Mental cap ; 9) Iron bottom ; 10) PVC jacket trade mark ; 11) PVC bush pipe

Water Ground Mica
Available water ground mica for use in in cosmetics having arsenic and mercury as nil content and lead as 0.06 ppm. Most suitable for cosmetics, plastic compounds, glass filled mica, laminates.

Metallic Ring Series of Tower Packing
Features: the Pall Ring packing have characteristics of low pressure drop, high flux and high efficiency. improved packing have lower pressure and higher mass transfer efficiency, than Pall Ring in the same size. In addition, improved has good distribution for liquids in the packing bed. Materials: Stainless steels, carbon steels, aluminum, copper, bronze, 304L, 316L and aluminum permeated steels, reinforce polypropylene, reinforced Nylon6, Nylon66, reinforce PBT etc. Applications: Various separation, absorption and desorption equipment, normal atmospheric pressure reduced and vacuum distillation plant, decarburateing and desulfuration systems, ethy1 benzene separation

Florist Wire
We supply florist wire, metallic colored wire, aluminum wire, zig zag wire, bouillon wire for florists and designer. Different guage size and color available.

Color Waterproof Joint Filler Grout
NIC color grouts are designed for use in most types of ceramic tile and natural stone applications. It is treated with the exclusive sanitized biocides, providing effective, lasting protection against mould and mildew. Surface preparation: Ensure all loosen materials and droppings are removed from grout joint prior to grouting. For porous tiles such as terracotta, wet the joints before application.

Titanium Boron
Function and characteristics: It is applicable to fusion casting of deformed aluminium alloy, especially 3003, 6063 alloy and pure aluminium. It shall be put in by separating aluminium slag, which must be mixed evenly.

Magnetic Powder Cores, Soft Ferrites
1) Magnetic powder cores: a) High-flux, MPP and sendust powder cores offer superior characteristics, such as high saturation flux density, low power losses, excellent temperature resistance and impact resistance. b) High-Flux powder cores are suitable for inductors with higher power density due to the highest saturation flux density. c) MPP cores offer the lowest power losses and better temperature stability. d) Sendust powder cores behave the best performance cost ratio. e) Applications of three types of cores: i) Active power factor correction (PFC) inductors ; ii) Switching regulator inductors ; ii) Resonance inductors. 2) Soft ferrite: A wide selection of soft ferrite includes: Toroid cores, planer cores, pot cores, EC cores, screw cores, multi-hole cores and tube cores

Wire Rod
Specifications: Φ5.5 - Φ16mm hot rolling wire and rebar. Grade: carbon steel, high-quality carbon steel, welded steel, concrete steel

High Density Alloys of Tungsten
1) With high-density, high-intensity and excellent absorptive character to X and Y radial, with a feature of excellent mechanical cutting properties, welding and surface plating properties. 2) Usages: used in armaments (such as missile, armour-piercing bombs); aviation (gyroscope rotor of plane, airship, avigraph; counterweights of plane motor); medical appliances (shielded enclosure to defend various radials); petroleum (counterweights of oil drilling instrument); watch case, whip of mobile phone, etc.

Crystal Soil
(1) Crystal soil is a new type of green environmental material. Free bring into play, dress up beautify, manufacture the various handicraft article. (2) It is non-toxic, odorless, and clear. It can absorb water up to 120 - 170 times of itself. May cultivate various potted landscape plant growing, not needing watering in every day. (3) After expansion it looks very colorful and transparent. Used for indoor plants to make your home and office more unique and beautiful. Continue there being an effect's had ensured that are what plant growth needs nutrition and moisture content. (4) Many colors are available: red, pink, blue, yellow, purple, orange, green, light green, transparent. Use convenient, clean hygiene and beautiful expert

Fire-Resistant Fiberglass Mesh
Fire-proof fiberglass mesh is made by C-glass or E-glass woven roving as its basis material. After surface treatment, it is high in fire-proof and it is an ideal engineering material for construction field. Specifications: 1) Mesh size: 6 x 6 mesh/inch, 5 x 5 mesh/inch. 2) Weight: 130 - 160g/m2. 3) Weave: leno

Exterior Super Putty
Features and benefits: 1) An exceptionally formulated high strength two-component based coating materials for existing exterior wall surface before painting. 2) Easy to spread. 3) Anti-crack. 4) Easy sanding and alkali-resistant. 5) Suitable for the surface renew. Applications: 1) Mixing ratio: powder: additive: water = 20kg:2.5kg:5-7kg. 2) According to the proportion of water and powder, firstly pour water and additive into a clean container, add powder, stirring with an electrical mixer into lump-free mixture; restirring after stand for 5-10 minutes, so as to achieve the optional effect. 3) Applies the first layer with a trowel and spread evenly on the wall. Allow the first layer to dry for at least 4 hours, the second coat is followed. The total thickness of coating should be at least 1mm

ADC Blowing
Used to make PVC, PP, PE, polyamide, neoprene, caoutchouc, butadiene
acrylonitrile rubber, butyl rubber, styrene-butadiene rubber and silicone rubber

Gypsum Ceiling PVC Lamination Aluminum Foil
1) Basic structure :PVC facing finish + paper surfacing plasterboard+ aluminum foil or paper back. 2) Thickness: 9mm, 7mm, 7.5mm. 3) Standard Size: 600*600mm 600*1200mm

Refractory Products
We mainly deal in exporting all kinds refractory products, including magnesia brick, magnesia carbon brick, magnesia chrome brick, magnesia material, magnesia alumina chrom brick, alumina casting mix and magnesia gunning mix

Aluminium Titanium Boron
Function and characteristics: It has lasting refining capacity and strong effect. The internal composition and metallographic structure without segregation, clustering and inclusion phenomena.

Pipe-Fittings
We are professinal manufacturer and exporter of all kinds of butt weld fittings from pipes. our annual output is 10,000 tons,can produce DIN/ANSI/JIS/ etc. kinds of flanges,also we can produce as per your drawings to satisfy your special requirments.

PMMA Sheet
PMMA/ABS/PMMA co-extruded sheets are used for sanitary ware. They have such advantages as high hardness, perfect wearability,  easy forming and high gloss surface.